Phanteks PH-F120SP_BLED Blue LED Case Fan

Pros: I grabbed these in conjunction with a Phanteks Enthoo Pro TG SE Full ATX case so that I would be able to match the fans. Currently I have 3 along the top, with the CPU Radiator at the front of the top of the case with another fan under it, push/pull as well as the two that came with the case pulling in the front, another on the HDD rack blowing straight into my GPU. The fans on the top, and front of the case run to the Phanteks Fan Hub and are all on the same PWM Hub, of which is plugged into my CPU Fan slot. My i7-7700k Idles around 34, which is incredible, and once the temp and load go up you can hear the fans work in unison for seconds, and then return to normal. I was playing Far Cry 5, maxed out, 2k, and I couldn't hear the fans. They are just wonderful. They look stunning especially inside a case that's white, they don't dilute the quality of the LED's inside the case and the air flow is wonderful. I am so so so so happy with how these fans came. Also, the cables are LONG. which makes life really easy in a full ATX case

Cons: none

Overall Review: 3-pin so no PWM but if you're using a hub, there's no worry!

Pros: -Silent below 50% speed
-Good build quality
-Button to turn the light on/off

Cons: -Moves very little air, even considering it's a static pressure fan
-Doesn't work well as either a case or radiator fan
-Red light doesn't work well at all, results in an X pattern on it since the light can't penetrate the white blades.
-Dim light

Overall Review: Bought this for use as a case fan since the air intake has to come through a pair of fairly small filtered slits. I'm not sure how useful it is though, doesn't seem to do much when at low to moderate RPM. Tried slapping it on an Arctic 120x50mm AIO but it was less effective than the high airflow fans included.