Hard Drive Adapters

• Color: Black
• Weight: 0.05
• Model #: PNL9M16

• Color: Black
• Changer Type: IDE to SATA with ODD Support
• Connector A: IDE 40-Pin
• Connector B: SATA
• Model #: IDE2SAT2

• Color: Black
• Changer Type: Compact Flash Card to IDE
• Specifications: This product does not support hot-swapping of flash cards while the PC is powered on. You must turn-off your computer to switch cards.
• Model #: 35BAYCF2IDE

• Color: Black
• Specifications: Connector Types: 1 - IDE 40 pin Male Connector Types: 1 - SATA Data 7 pin Plug Connector Types: 1 - SATA Power Plug Connector Types: 1 - SP4 Male Enclosure Type: Steel LBA support: 48-bit Product Height: 1.02 in [26 mm] Product Length: 3.98 in [101 mm] Product Weight: 3.67 oz [104 g] Product Width: 3.07 in [78 mm] Humidity: 8% ~ 90% RH Operating Temperature: 5°C to 80°C (41°F to 176°F) Storage Temperature: -40°C to 70°C (-40°F to 158°F) Chipset ID: JMicron JM20330 OS Compatibility: OS independent; No software or drivers required
• Weight: 0.47
• Model #: SAT2IDEADP

• Color: Other
• Changer Type: 9 Pin Serial Male to 10 Pin Motherboard Header
• Specifications: Color: Gray Connector A: 1 - DB-9 (9 pin; D-Sub) Male Connector B: 1 - IDC (10 pin; Motherboard Header) Female Cable Length: 15.98 in [406 mm] *Conforms to Apex10-Everex-Intel Specification, please refer to wiring diagram on the Downloads Tab
• Weight: 0.08
• Model #: PLATE9M16

• Connector A: 1x USB 3.0 male
• Connector B: 1x 2.5in SATA III
• Model #: E000133-1

Limited time offer, ends 09/11

• Changer Type: IDE to SATA
• Specifications: NOTE: 1. The adapter need for external power adapter to work. 2. When connecting the riser need to turn off your computer. 3. IDE Hard disk / CD-ROM motherboard SATA adapter when the need to hard disk / CD-ROM set jumpers main dish.
• Connector A: 3.5" 40 pin Female IDE / PATA
• Connector B: 7+15 pin (22 pin) SATA
• Model #: 35IDE2SATA-MNDL

• Color: Red
• Specifications: Connect a PCIe M.2 SSD (NVMe or AHCI) to your computer through PCI Express for ultra-fast data access x4 PCI Express to M.2 PCIe SSD Adapter M.2 NGFF SSD (NVMe or AHCI) Adapter Card x4 PCIe expansion card Expansion bay adapter supports M key M.2 NGFF PCIe SSD Add a high speed 4-lane M.2 NGFF SSD such as Samsung 950 Pro or Samsung SM 951 to your PC Wide compatibility with M.2 SSDs (NVMe and AHCI): 110mm, 80mm, 60mm and 42mm OS independent for fast and easy set-up
• Connector A: 1 x M.2 (NGFF, M-Key, PCIe x4)
• Connector B: 1 x PCI Express x4 Male
• Model #: PEX4M2E1

Limited time offer, ends 09/11

• Model #: M2EX30T80-2P

(1)

• Type: Dock
• Material: abs plastic
• HDD Count Supported: Single HDD
• Number of Bay: 1
• Model #: K308SAS

• Color: Black
• Specifications: Mount both PCIe (NVMe) and SATA based M.2 SSDs inside your computer using this PCI Express adapter card 3 Port M.2 SSD (NGFF) Adapter Card / 1 x PCIe (NVMe) M.2 / 2 x SATA III M.2 / PCIe 3.0 PCI Express 3.0 M.2 NGFF Card Easily expand the storage and improve the overall performance of your desktop or server Supports PCI Express 3.0 (x4) ideal for a high-performance M.2 PCIe SSD (NVMe) OS independent with no drivers required for a fast hassle-free set up Includes a low-profile bracket
• Connector A: Connector Type(s): 1 x PCI Express x4 Male
• Connector B: Internal Ports: 3 x M.2 (NGFF, B-Key) Receptacle / 2 x SATA (7 pin; Data) Plug
• Model #: PEXM2SAT32N1

Limited time offer, ends 09/11

• Brand: RIITOP
• Model: M2TPCE16X (PCIe M.2 NVMe AHCI SSD to PCIE 5.0 16x Adapter Card for Key M 2230/2242/2260/2280 mm Size M.2 SSD Full Speed 16GB/s)
• Type: PCI Express Controller Card
• External USB Ports: PCI Express
• Model #: M2TPCE16X

Limited time offer, ends 09/11

• Color: Black
• Conversion Tray: 1 x 2.5" Drive to 3.5" Bay
• Mobile Rack Drives Support: 1 x 2.5" Drive to 3.5" Bay
• Mobile Rack Interface: SATA I/II/III
• Model #: 25T35-2P

Limited time offer, ends 09/30

• Model #: 11-001-257

Limited time offer, ends 09/11

• Type: NVMe to SATA3.0
• Model #: NVTS6P+6C

• Model #: N2-M2-SSD-DUPLICATOR

Limited time offer, ends 09/11

• Type: NVME to PCIe 4.0
• Model #: 4NV2PCE16X-PRO

• Connector A: 1x USB 3.0 male
• Connector B: 1x 2.5in SATA III
• Option: 1 pack
• Color: Black
• Model #: E000060-1

• Changer Type: SATA
• Model #: P02047

Limited time offer, ends 09/11

• Model #: NVEXT-30

Limited time offer, ends 09/30

• Model #: IDE2SATA

Limited time offer, ends 09/30

• Model #: PCIEX16TONVME

• Cable Length: 40cm
• Changer Type: USB to SATA
• Specifications: 5Gbps
• Connector A: USB 3.0
• Model #: E000133-4

Limited time offer, ends 09/30

• Model #: 2X25TO35MA

• Form Factor: M .2 NVME & SATA SSD to USB 3.2
• Device Type: External Solid State Drive (SSD)
• Model #: NVME-S32USBA

(1)

• Changer Type: USB 2.0 to SATA
• Model #: UTS1-2A-05-BK-BP

• Changer Type: USB 3.0 to SATA
• Model #: UTS2-3A-03-BK-BP

Limited time offer, ends 09/11

• Type: PCI Express Controller Card
• Compatibility: M Key PCIe M.2 NMVe, B Key SATA M.2 NGFF SSD (2230/2242/2260/2280/22110mm)
• Specifications: 1.Connects one B key & one M key NGFF SSD at the same time to PCI-E 4X motherboard. 2.Compliant with PCI Express M.2 specification 1.0. 3.Compliant with SATA 3.0 specification for B key. 4.Compliant with PCI-E 4X 3.0 specification for M key.
• Dimensions: 5.52x4.73x0.79 inch.
• Model #: DUL-M2TPCE4X

• Connector A: 1x USB 2.0 male
• Connector B: 1x 2.5in SATA III
• Model #: E000129-1

Limited time offer, ends 09/30

• Model #: SATA2IDE12

Limited time offer, ends 09/30

• Specifications: Fits in Standard 5.25 inch Driver Bay and may not fit in chassis with customized Bay Please ensure the 5.25 inch Driver Bay of your computer is standard size before ordering this item. - 1x 3.5 - inch Drive and 1x 2.5 - inch Drive could Mounted to this ITEM at the Same Time. However Mounting only ONE drive is recommended for heat dissipation. What's in the Box 4 x Rubber Washer 8 x Mounting Screws included
• Model #: 321002

Limited time offer, ends 09/11

• Model #: NM2MC13-L

Limited time offer, ends 09/11

• Brand: SoNNeT
• Series: NV2E-20GH
• Part Number: NV2E-20GH
• Color: Black
• Model #: NV2E-20GH

Limited time offer, ends 09/30

• Type: SATA Expansion Card
• Specifications: Converts Serial ATA to Parallel ATA Supports ATA 100/133 Fit for 3.5/2.5 SATA HDD DVD. One 40pin IDE port. One Serial ATA port. One 4pin power connector. Chipset : JM20330
• Features: SATA to IDE Adapter ("Convert SATA Hard Drive to IDE Hard Drive") Connect a SATA hard drive to you IDE motherboard with this SATA to IDE Adapter Turn your SATA hard drive into IDE interface hard drive Features the JMicro JM20330 chipset Compliant with SATA specification and supports up to 2TB hard drives
• Package Contents: 1x bridge board
• Model #: 11-001-170

• Brand: StarTech.com
• Series: CB-M2NVME-C3
• Part Number: CB-M2NVME-C3
• Color: Black
• Model #: CB-M2NVME-C3

Limited time offer, ends 09/30

• Model #: INBR52512CMFAN