BEST SELLERS

In Computer Case

No damages and fans intact

- excellent airflow - tight tolerances - classy design(Subjective) - quick remove fan mounting - lots of extra mounting hardware. - very competitive price

This whole product oozes german engineering. Before the case review itself, my favorite part. It came with a small plastic container, filled with individually marked bags of every type of screw that could be needed. And dividers for the container so that each type of screw could have it's own compartments for storage. It includes a GPU support mount for if you have one of the "3 fan" GPUs. One of the included "screws" types are rubber isolation mounts for the hard drives to be mounted but isolated from vibration (and of course they include screws that fit these perfectly). Everything you could need to mount every component you have exactly how you want it. The front, right, left and front panels are all removable (they just pop off). The metal brackets you mount most things on (especially the PSU) are removable, and they attach by having a small tab of metal that rests inside the frame, and then a tiny screw that holds the bracket in against the frame. Works beautifully and the weight is not on the threads of the screws. The people who said this "doens't fit their PSU" almost definitely just used the product wrong. I have the standard PSU size which fits great (pull off the front panel and bracket for easier installation though) but there are 2 other bracket adapters with multiple mounting holes for every type of PSU. If you managed to find a PSU that doesn't fit, I honestly do not trust that PSU. It is either so old or built so far from standard practices that I would not run it in my home for safety reasons. And of course this case looks nice. Got my board with chunky graphics card, and network, and liquid cooler, spare drive and corsaid lightning node installed happily in at least 1/3rd less space. Matches perfectly with the brown wood/black metal ikea furniture most of my house is decked out in. Oh and the fiddly little wires that are the worst part of setting up a motherboard? Actually bundled together and labeled. Easiest install of those I've ever had. I can't believe how much quieter this case is. With the full metal mesh everywhere the air just circulates unimpeded. Also that metal mesh is very strong, don't understand quite how they got it as strong as they did.

price airflow space just a nice simple look

I really love it. I put a mostly blackout build in this thing and I think it came out really nice. I put 3 more 120mms in the roof

Large. Has all the space you need. Well made and solid.

It was very easy to put all the components and cable manage

Showstopper! Ease of use is amazing Fits everything you'd want or need(maybe some people are crazy) Included fans and hub make installing everything else a little easier All the little extras are great

Very easy to work in easy cable management Clean look Spacious

Build quality Aesthetic Size price!

This is a Montech (30 years in industry) brand case, Series Air 900 Mesh. It is a TX Mid-Tower case. The mesh design is very innovative with air flow that is above that of many cases that I have used in my 25 years of building. This case goes above the specification of similar cases that are on the market. If you want to get away from the standard HDD case and add more SSD’s to your build, then this is the case for you, I know it is the one for me. The case is capable of holding five internal SSD’s and with two adapters can hold an unprecedented 7 SSD’s. If you do not convert the two HDD slots you can mount two HDD. The case also has eight expansion slots to the rear of the case, allowing you to plug in one to eight expansion cards. It has removal dust filters (front and bottom) the front one has magnetic strips to keep it in place. This is a sturdy case, 0.6mm thickness. It will accept an ATX, M-ATX, E-ATX, and Mini-ATX motherboards. It has one tempered side panel, so a clean build to make the computer presentable. There are eight fan mounts throughout the case, two of those are built in adding to its venting process. The power supply unit is mounted on the bottom rear of the case (note if you stay in a flood prone area to get a computer stand for added elevation). The cable management system is about the same as other cases in this price range. As stated, this Mid-ATX design has two HDD (3.5) mounting bracket. I used adapters to convert them to 2.5 giving me seven SSD mounts and a smoother running, noise free computer. I'm using the Unique case it allows easy mounting of all optional fans. For testing purposes, I used my MSI X470 GAMING PRO AM4 Motherboard from an earlier build. I had no problem mounting the board or getting a successful boot on the first try. This case with max fans and a AMD RYZEN 5 2600X 6-Core 3.6 GHz Desktop Processor is very quiet. You can get this case in 3 designs: Elegant, Dazzling, and Unique, whichever design you choose I think you will be very satisfied with your purchase. I like the slope of the front panel control buttons; it allows easy access without mistakenly touching the wrong buttons or mistakenly power off the mid-Tower. Without a doubt I would purchase this case if only to upgrade the case. Great buy!!!

Affordable, Brand new.

It isn't hard to build it yourself, it's easy, and I do love it. A lot of Airflow, a lot of room.

I purchased 2 of these to build some computers into, both turned out amazing. They route cables well, cool excellently, and really made the builds shine. Highly recommend

Plenty of room Easy for good cord management Good design

Good value for the money Plenty of room in back for cable management Easily fits full-size ATX & GPUs Included fans

Great budget PC case that offers a lot of features found in more expensive cases. Easy to use cable routing and the included RGB fans are a bonus. Appreciated the magnetic front panel along with the magnetic top dust filter.

-Great airflow for a fishbowl style case -Plenty of room for any full sized component -Top 360mm AIO support! -A ton of room in the second chamber for cable management -Supports 2.5" or 3.5" SATA drives and has 2 drive cages and 2 brackets to mount them to -Very easy to build in even with the smaller footprint

- Great build quality - Looks amazing