BEST SELLERS

In Computer Case

- Very good airflow, temps are way lower than my old case - 4 included fans work great - Cables can be tucked away in the back - Lots of additional screws - Anti-sag bracket - Looks nice

Plenty of room for components, excellent airflow, preinstalled ARGB fans work great, lots of room for cable management in the back and basement of the case, easy to build in. Comes with a powered PWM/ARGB hub. Over all I couldnt be happier with this case for the price!

Straightforward ease of install. Able to daisy chain the PWM connections together without having to look obvious. Incredibly quiet and easy to configure in the BIOS.

Replaced a much larger hTPC. Using an AMD 5700G, no GPU, thermals are great.

I just did an mATX build in this case with the following components: i5-4690k with H100i AIO cooler ASRock Z97M OC Formula G-Skill Sniper 8GB 1866MHz nVidia GTX 770 2GB (Transferred from an older build) Samsung 840 EVO 250GB Western Digital Black 1TB Corsair RM 750 power supply This case is awesome to build in. While it is certainly a tighter fit than a full or mid tower ATX, it is still not that bad to build in. Fractal did an EXCELLENT job maximizing the capabilities in a case of this size by making use of every space available. The front panel accepts two 2.5" drives, the floor of the motherboard compartment accepts two 2.5" or 3.5" drives, and there are two HD bays which hold 4 2.5" or 3.5" drives each. This gives the case a total storage potential of up to 12 hard drives simultaneously. Obviously, if you choose to do that, there are some sacrifices. If you wish, you can remove both hard drive cages and place one on the floor on the power supply compartment. This frees up the top of the case to allow the installation of a radiator on the top in BOTH chambers of the case, plus a radiator in the front of the motherboard chamber. That means you can potentially fit up to THREE 240mm radiators in this case and still retain one of the hard drive cages if you are careful about cable and tube routing. Even if you remove both drive cages, you still have the potential to mount four drives, two of which can be 3.5". This case also presents an excellent view through the side window. I mounted a Silverstone 12" LED strip on the top of the case on the motherboard tray side. It is behind the H100i radiator and fans and it fits PERFECTLY. It is exactly the right length to fit in this case, so I highly recommend 1 or 2. The look is nothing short of stunning. Also, the onboard fan controller is functional and nice. I like being able to control fan speeds and I have 4 case fans hooked up to it (I bought an extra 140mm fan and put it in the rear of the case on the PSU side, which accepts a 140mm fan, then I moved the 120mm that was there to the front on the motherboard side. Giving two 120mm intakes and one 120mm exhaust on the MB side, plus one 140mm exhaust on the PSU side. Plus, the two radiator fans are set up as intakes on the MB side and are hooked up to the motherboard and controlled with Corsair Link. This case supports extremely high airflow levels. With all of the fans turned up, it is quite audible. But with the fans on their lowest setting and the H100i in quiet mode, the case is extremely quiet and it stays VERY cool even in this setting. This case offers more water cooling support out of the box than something like the Fractal Define R4. The R4 is intended to be used with an air cooling setup due to its massive width for a mid tower. The Node 804, on the other hand, is obviously intended to use extreme amounts of water cooling for such a small case. I'd love to do a custom loop in this case with three 240mm radiators in t

This case is absolutely amazing. It has literally, out of this world airflow, and can fit just about anywhere. Considering it’s a microatx, I was afraid of cable management being a mess, but even after dealing with a non modular PSU,the cable management turned out to be just as good as the airflow. There is a ton of room available for cables.

-Brings 5 pre-installed ARGB fans with hub - Great size for being a fish bowl design -Aesthetics are great and original !! -Has original and cool compartment for PSU -ARG strip around the bottom of case Overall sturdy well made and of quality materials . definite must for a long lasting high end build you want to show off!!

Very huge case lots of room. Has 4 internal 3.5 slots for hard drives. Very well built this case is heavy.

Plenty of space and the 4 preinstalled fans are quiet

Looks superb. Cools system very nicely. No software needed on a Phanteks case.

The case was really easy to set up and the back door for cable management is really nice.

Lots of room, decent thermals if you add another exhaust to the top, fan hub is nice and the main reason I keep buying these.

Massive, tons of space, lots of cable management ports, slots, and ties. Great airflow and organization. Looks great and is amazing build quality. Highly suggest. Quiet and slick.

Tempered glass Cable management Build quality

Very big case, looks way larger than in pictures nice airflow and it comes with the correct screws for easy installation

Everything looks good no issues

These worked perfect for the 7xl case.

I got this case on a sale and it was definitely worth the money. Its the perfect budget compact case to run your computer in. Temperatures are reasonable and the case allows you to mount two fans or a fan and a drive inside the case. It's built with high quality materials and structure holds up.