BEST SELLERS

In CPU Air Coolers

This cooler has exceeded my expectations of what a low-profile cooler can do. It won't work in EVERY Mini-ITX case, however it fits well in my Silverstone Raven RVZ03 with the stock slim 120 mm fan right above it. This is cooling a 95 W Ryzen 7 1700X with gaming temperatures rarely reaching above 56 C (according to Tdie temperature readings) and hasn't creeped above 67 C with a full Prime95 workload on 16 threads (small FFTs for max heat). If your plan is to overclock, this cooler doesn't have a ton of headroom for it, but at stock speeds it cools my 95 W 1700 X with remarkably well for the size of it. Also, the fan is basically inaudible, even with the "Normal" fan speed curve set in my motherboard BIOS.

- Quiet - Amazing cooling potential - Expanded heat plate to properly cool the entire heat-spreader - Enough heat pipes to choke a horse. - Was able to properly cool a 24c48t epyc 7301

This is a very good replacement for the cheap original equipment fan that comes on the Intel 1150 processors. What is especially nice is that it has about twice the size cooling fins and the fan runs very smoothly and quietly. I recently replaced my motherboard and the cheap push pins on the stock fan didn't fare so well being removed and used again so I got this and am very happy with it as it dropped my idle temperature by about 4 - 5 degrees. The mounting system with the spring loaded screws and backplate make for a very secure mount that will never loosen up. The only downside might be if you already have your mother board installed in your case and if it doesn't allow access to the CPU backplate then you will need to remove the motherboard in order to mount the fan and its backplate. The trade off is that you end up with a fan that moves more air and dissipates more heat while making less noise. I was going to scrape off the thermal paste that comes with it and replace it with some Arctic Silver, but after trying their thermal paste I don't see the need for it.

-very small and compact -sleek design -quiet

-Top Air Cooler for Threadripper. -Peace of mind, which means ZERO nightmares about any water cooling leaks. I've seen too many people in real life, and read too many articles about others with water-cooling systems waking up to their PC literally looking like a broken dam.

good product I recommend it

Such a good deal. Looks great. Actually my benchmarks went up a couple points after. Pretty simple install

- hefty, solid design - quiet - nicely packaged

No compromises air cooling

Easy installation Perfect for ITX

I bought this to replace a failing AIO, the second one that has been in this system. Believe it or not, this little air cooler is giving me temps that are only about 5c higher than the H80i that I was running. This is as it comes, with no optional fan! I did use Kryonaut (on both).

Excellent cooling for non overclocked CPU. Cooled an i3 3240 and a i5 8400 quietly and with gorgeous RGB. Low profile. Easy installation.

- Quiet - Doesn't interfere with the memory - RGB setup was pretty normal - Temperatures seem decent

Cheap easy to install effective

It performs exceptionally well, keeping temps cool and is well designed.