
Great price Exceptional cooling ability RGB and white is great for those who like it Well built and designed Easy to install

- Quiet - Doesn't interfere with the memory - RGB setup was pretty normal - Temperatures seem decent

Quality build. Cools really well, nice looking cooler.

10 fan headers, that's a lot more than many other more expensive controllers Easy installation Compact size

Keeps my (non-overclocked) i7 at <40C when plugged into motherboard pinout, typically running very quietly about 700 RPM. And the lights are pretty when plugged into the motherboard controller. Assembled and secured to CPU without damaging MB or blocking RAM slots

.jpg)
Amazing value for the price!




- Keeps my i7 at 21C & idle and I've never seen it jump above 65C. - 2 RGB fans. - Not bulky (on the sides).

-Quiet -Quality -Mounts to almost anything and has an offset for AM5 -Will keep a 12900K at 180 watts under 85°C -Will keep a 9700X at 140 watts under 90°C -Will keep a 11900K at 150 watts under 65°C

It worked like it should and lowered my HTPC old Intel 3770K temps down 10 to 15 degrees from stock cooler. Fan was loud at 2200 rpm but I had a Natua resister low noise extension power lead that lower the rpm to 1100 and it is now silent!


- Typical high quality Noctua fans and heatsink - Fits square and narrow LGA3647 sockets - Includes 2 fans with Y splitter cable - PWM - Fits perfectly in full tower case - Keeps Intel Xeon Silver 4114 cool - Easy to follow instructions - Included all the necessary hardware and tools for installation - 6 year warranty

- Pretty quiet. - Keeps my 9700X (I know I should've gotten 7800X3D, but here we are) that is undervolted to -15mV to at most 75 degrees celcius while gaming. - Easy to install on AM5 socket.

-Better temps than CM Masterliquid 120 -Works excellent in push/pull -Keeps RAM and VRM temps in check

Reduced CPU temp by 15c immediately upon testing. This allowed me to increase my overclocking on my tired X58 motherboard. Had all the needed hardware with easy to read instructions.

Keeps a Threadripper 1950X (not overclocked) at approximately 30C at idle and has never exceeded 62C at load. The hardest part of the installation is figuring out how much thermal paste to apply.
