
- Aesthetically a thumbs up on my Small Form Factor Case - Fits on the SFF Case with old pc components (4 yrs old) - Highest Temp I got 69° with all the processes running extremely high at room temperature 79° (2/9/2022) - lowest Temp was 30° on idle and averages 46° to 60° while working (still working from home. check the photos of my home setup.)

Great price Exceptional cooling ability RGB and white is great for those who like it Well built and designed Easy to install

- came as described - fast shipping - does the job of decent albeit basic cooling

You get an alan wrench to insert through the top corners of the design... to make installation as painless as possible! Cools 16 core 1356's nicely. (On N82E16835608074 with a full tower case) and N82E16813131816) Comes with the best thermal paste as possible. (looks like silver mix). More than enough for 2 or 3 applications. Fans are quiet -even for 2 cpus installed. Made in Austria.

Keeps a Threadripper 1950X (not overclocked) at approximately 30C at idle and has never exceeded 62C at load. The hardest part of the installation is figuring out how much thermal paste to apply.


Keeps my (non-overclocked) i7 at <40C when plugged into motherboard pinout, typically running very quietly about 700 RPM. And the lights are pretty when plugged into the motherboard controller. Assembled and secured to CPU without damaging MB or blocking RAM slots


Nice rgb It works

- Perfect fit right down to the millimeter - Quiet - RGB and PWM easy to connect - Doesn't overhang RAM

Very quite and compact. Installation is very simple. Does a much better job than Intel stock cooler.

* Super Easy to install * Sharp looking product * Quick and easy color change solution


No complaints, working well, not noisy



I use MSI 's Mystic Light to sync the color with other fans. Keeps my Ryzen 7 9800X3D temp at 39 to 42(C) idling The DDR5 memory sits little high, I was able to moving 1 fan half inch above the heatsink. I ran 3dMark Demo 's Steel Nomad, the temperature peak at 51.3 (c) for a second, Averge temperature was 44(C)



- Excellent SFF fitment - Keep my 5900X below 60°C at 100% load (24/7 Folding@Home, P.A.T.C.H., Tm# 64512) - Blackout aesthetic is choice - Fairly priced - Easy to install (AM4) - Includes screws for 15mm and 25mm 120mm fans - I swapped out the included fan for a Noctua Chromax NF-A12x15 PWM (Silent!) - Ships direct from manufacturer ID-Cooling in China