
good product I recommend it

Works well, easy to install

Excellent!!

10 fan headers, that's a lot more than many other more expensive controllers Easy installation Compact size

VERY quiet, running right now, aft3er about 4 hours, 50 degrees Centigrade, Ryze 9800, 32GB of ram , Asrock X870E Taichi LITE mobo

Quality build. Cools really well, nice looking cooler.

Big cooling Thick fan Quiet operation and effective fan speed op 100% recommended even in the hotter Intel chips.

Keeps CPU cool, looks great and has A-RGB

It worked like it should and lowered my HTPC old Intel 3770K temps down 10 to 15 degrees from stock cooler. Fan was loud at 2200 rpm but I had a Natua resister low noise extension power lead that lower the rpm to 1100 and it is now silent!

Look GoodEasy InstallationGood CPU Support


The most easiest cooler I have installed. Installed on an Asrock x399 Taichi 1950x Threadripper. Temps are great on this cooler. You cannot go by your motherboard bios or auto tuning utility software that came with it. Use a program like Hwinfo which will give you an accurate reading. Threadrippers read 27 degrees Celsius higher when a Tctl reading is used to calculate a temp reading. Reading temps at a higher degree triggers the cpu fan to work as it should according to what others have said. Using Tdie reading will give you an accurate reading which is minus 27 degrees Celsius from Tctl. Many people panic over the readings that use Tctl instead of Tdie.



- Fits the cramped space around the ram and GPU on my micro ATX board. - Noctua mounting system is very good - Average cooling performance - Quiet

.jpg)
Well made good quality fan

Easy enough to install. Light color and patterns are controllable.

- Keeps my i7 at 21C & idle and I've never seen it jump above 65C. - 2 RGB fans. - Not bulky (on the sides).
