
Purchased to improve CPU cooling and potentially correct an operating fault (frozen tray clock, halting computer processing) potentially caused by inadequate cooling from OEM AMD Ryzen CPU cooler. Installation resulted in 5 deg C temperature drop of CPU operating temperature, thus likely extending life of CPU (but unfortunately did not correct periodic frozen tray clock). Installer should be aware that on MSI Tomahawk board, minor interference must be removed from the cooler fins if an active cooler is installed on the M.2 NVME SSD

- Solid construction - Many socket mount types - Colorful addressable LEDs and output a Rainbow when not connected to anything - Very reasonable cost

Temps dropped by 30° on my R5 3600 Easy install Includes pre applied thermal paste Mounting method makes upgrading CPUs much much easier with the secondary bracket design.

Running a Ryzen 5 9600X at max temp of 42c idle. More importantly, it's in a micro ATX case on top of the desk in my living room where I can play Cyberpunk and it stays quiet enough to not bother my partner. The smaller form turned out to really be helpful in the small case with cable routing, etc.

Great, it has a 270 watt tdp and it looks cool

Excellent design Works GREAT! EASY INSTALL.

I use MSI 's Mystic Light to sync the color with other fans. Keeps my Ryzen 7 9800X3D temp at 39 to 42(C) idling The DDR5 memory sits little high, I was able to moving 1 fan half inch above the heatsink. I ran 3dMark Demo 's Steel Nomad, the temperature peak at 51.3 (c) for a second, Averge temperature was 44(C)

My Ryzen 5800XT runs at 32c at idle and never hits 60c while gaming. Easy to install.


Feels like its built well fans are quite and definitely keeps everything cool

ARGB Fans Incredible price to performance Easy to install Good aesthetics

60c CPU temperature in a 94F environment for 3 hours!

- Easy modern mounting for AM5 - Good even contact - Great temperatures - Idle 35c / Prim95 60c / Peak 69c - Looks good - Good build quality - I think the fans sound fine, at high loads they ramp up and get louder, but its a smooth sound without any annoying hub whine or other jarring fan sounds. - Includes a fan splitter & speed switch for High 2000+ RPM, PWM default, and low 1800 RPM settings. I left mine on default PWM motherboard controlled. - Premium packaging materials and unboxing experience

- great price on special - good quality - good looking - 5 cooling pipes - slim design - amazing packaging

Two 120mm aRGB fans


- Silent - Look good - Fast shipping (less than 48 hrs)



The cooler comes with easy to change CPU socket adapters. The fan is easy to attach/detach. It uses the same fan as the MSI AIO Radiators. (Good Fan)