JVFYI PCIe x2 ASM1142 USB3.1 TYPE-E 10Gbps Expansion Card

Support PCI Express Gen-III x2

Support high bandwidth performance with low latency

Support PCI Express Link power management

Compliant with PCI Express Base3.0 Specification

Compliant with Universal Serial Bus 3.1 Specification Revision1.0

Compliant with eXtensible Host Controller Interface specification Revision 1.1

Compliant with USB Attached SCSI Protocol Revision 1.0

Each port transmission speeds up to USB3.1 Gen-II 10Gbps

Each port has its own power supply module, no need extra power

Maximum current 3A/each port

Support 1 x Type E USB3.1 port

Backward compatible with Legacy USB function and device

Support driver on Windows7,Windows8,Window8.1, Server2012and Windows 10

Support various Linux kernels

Chipset: ASM1142

Product Name PCIe x2 ASM1142 USB3.1 Type-E 10Gbps Expansion Card

Bus Width PCIe 3.0 x2

Bus Connector X2

Port Number 1-Port

Port TYPE USB3.1 TYPE-E

Transmission speed 10Gbps

Chipset ASMedia ASM1142

Power Supply 5V/3A Each port

Power Supply mode PCIe bus

Low Profile Breaket support yes

Operation temperature 0-85

Storage temperature -20-125

Relative Humidity 0-90% non-condensing

Operating system Windows: xp/vista/win7/win8/win8.1/win10/win11

Windows server:2012/2015/2019/2022/2025

Linux: kernel 2.6.31 and above

MacOS:10.8,10.9,10.10,10,12 and above (10.11 no support)

Package content

1 x PCIe x2 ASM1142 USB3.1 Type-E 10Gbps Expansion Card

1 x Users Manual

1 x CD

1 x Low profile breaket

System Requirements

Various Linux kernel2.6.31 and later OS in-box USB driver natively support UASP, no additional driver required

Mac 10.8 to 10.10, Mac12.12 and later

Windows Operation Systems: Win7/Win8/Win8.1/Server2012/Win10 32bit or 64 bit

An available PCI-Express x4/x8/x16 slot

Hardware installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computers cover.

3. Remove the slot bracket from an available PCIe x4/x8/X16 slot.

4. To install the card, carefully align the cards bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.

5. Replace the slot brackets holding screw to secure the card.

6. Replace the computer cover and reconnect the power cord.

Install Drivers

Windows Operating Systems

For Windows 7 32 or 64bit

1.Please insert the CD driver bound with PCIe USB3.1 Card into your CD-ROM Drive.

2.At the Windows desktop, click Computer Double click CD-ROM Drive to Brower drivers files:

Type: D: \ USB3.1 ASM1142 \Setup.exe, click OK. (Change D: to match your CD-ROM drive letter)

3.Follow the on-screen instruction to complete the installation

For Win8, Win8.1, Win SERVER2012 ,Win10 32 or 64bit

Using in Windows box driver for Win8, Win8.1 and Win10 to complete install the drivers

To Verify Windows® Driver Installation

Click on the Device Manager tab in System Properties, which you access from the Windows Control Panel. If you has installed successfully, you should see ASMedia USB3.1eXtensible Host controllerinstalled under Universal Serial Bus Controllers item.

Support

More information and settings please refer to the User Guides or you can contact us.