PAST 30 DAYS

LOWEST PRICE

In Computer Case

CHEAP!! Slick and attractive Thumb screws--always better than regular screws Sturdy enough 2 fans Plenty of ventilation Not loud

1. Great price for a Phanteks case. 2. Doesn't look or feel cheap. 3. Plenty of places to route cables and tie off with any of the plentifully supplied zip-ties. 4. For the price point you get features that aren't normally available on a budget case. 5. My final product looks great, just don't open the side panel (see below).

No negatives

🫶 just perfect love it

- Love the colors - Love the round glass which is expensive to produce but price of the case stays reasonable - Love that the magnets on the PSU housing are strong enough to stay latched even with my Corsair Shift PSU cables pushing on them some what. - Love that it works with a Corsair Shift PSU - Recommend leaving the PSU loose and installing the cables into the PSU then bolting it in. The wires will clear and the magnets on the PSU housing will hold with wiring putting pressure on them. - Fantastic temps. i9 14900KF stays in the mid 50Cs and 5080 Over clocked and under volt stays in the mid 60Cs while gaming (Cyberpunk maxed out, Wukong Maxed Out). Case has some serious air flow for being built for looks.

Lots of pros with this one (IMO): * plenty of room * lots of room for fans and air flow * removable panels makes installation a breeze * cable management at back with velcro straps and zip ties (provided) * the 4 bay SSD drive cabinet that swings out to allow access to rest of system is a nice tough * power button and 2 USB + type-C connections at front (and bottom) is an added bonus (for my set up) * solid built case

Innovative, lightweight, looks amazing

I have used the T30 120 for years on my watercooled builds for radiators and and for air cooling . I expect these to work as great as the 120s . Happy to finally have them in 140s so I can upgrade to the 420 mm radiators for my upgrade build Lian li 011 evo XL Msi Meg X870e Godlike Amd 9950x3d Msi RTX 5090 Suprim SOC with alphacool gpu waterblock These T30 140 fans 11 fans in total used 2 Alphacool 45 mm 420 mm radiator 1 Corsair X5 420 mm radiator Alphcool vpp apex water pump great pump Optmus AM5 signature V3 cpu waterblock After using them for 3 months great fans for watercooling and are PWM control speed with my motherboard

Unified frame Quiet with good airflow ARGB lighting

It fits my gpu (5060TI) and my microATX motherboard nicely(the two I was most worried about). It says it fits up to a 280 AIO so Im looking to get a water cooler Great airflow Nice cable management Tempered glass Bigger than I imagined (use the card as a guesstimate)

1) Reliable, sturdy and well built. Much better than Scythe UltraKaze fans, by a long shot. 2) Worth the price if this is *really* what you "want" :) 3) Blows lots of air, great for Black Ice GT Xtreme 480 Radiator, but switched back to my old fans due to the extra noise. My friends, Girlfriend and room mates thought I was on crack for having these fans on my PC (but then again, they just don't understand "extreme" PC's). Note the radiator and most fans were outside the case.

-spacious -easy to work on

Product was delivered in perfect condition and is a beautiful case. I examined it inside and out and this case is going to be a blast to build with. Quite large for a mid tower allowing for alot of cooling and larger gpu's meaning it will work well for a ryzen 9 9950x3d2 and a 5070ti which is what this build calls for. Nice work MSI

Easy to setup and build Layout variety accomodates most hardware Decent quality and enough spare screws and bits to cover needs Lots of options for cooling and layout

lots of space, chance to upgrade to a screen later. Airflow is great.

This case has all the space you need to setup your parts in the way you want. Easy to build in. It's big but not TOO big. For RGB lovers with all those windows.