ARCTIC COOLING MX-4 2g 2019 Edition Paste Cooler Grease 8.5W/mK Water Cooling Conductive Heatsink Plaster Cooler High Performance Thermal Paste-2.0 Gram

Arctic MX-4
Well-proven and award-winning thermal compound that helps optimize heat transfer from the CPU/GPU to cooler. It is specially formulated, and contains no metallic particle for safety. Plus, the MX-4 lasts longer than the service life of your gaming rig, so apply it once, and the MX-4 maintains its hallmark performance till retirement of your system.

Award Winning Thermal Paste
The performance of our ARCTIC MX-4 Thermal Compound has been tested and honored by numerous independent magazines.

Better than Liquid Metal
The ARCTIC MX-4 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated quickly and efficiently. Superb in performance, MX-4 is the best companion for overclockers and enthusiasts.

Easy to Apply
With an ideal consistency, the MX-4 is very easy to use, even for beginners.

Safe Application
It does not contain any metallic particles so electrical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.

High Durability
In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years.

Value for Money
A high performance thermal compound perfect for system builders, there's no surprise that the MX-4 exceeds your expectations for its low price tag.

Features: - Designed especially for overclocking- High Thermal Conductivity Dissipating Heat Efficiently - No cure time- High long-term stability

Electrical conductivity: 0 pS/m

Ideal Applications: CPU / GPU Thermal

Thermal Conductivity: 8.5 Wm / K

Viscosity: 870 poise

Specific gravity: 2.50g/cm³

Operating temperature: -50 °C / 230°C

Content: 2g

Must see before installing CPU:

1. Remove the original CPU, clean up the dust on the fan and heat sink, and clean up the original silicone grease remaining on the heat sink, especially the hardened silicone grease. This is very important!
2. Insert the newly bought CPU in the correct direction and apply a layer of silicone grease on the top of the CPU. Take the small sticks of silicone grease in the needle tube as an example, squeeze 2-3 small grids of silicone grease on it.)
3. Reinstall the heat sink, first press the heat sink with your fingers and move it up and down, left and right, let the silicone grease inside spread out evenly and exhaust air, and then follow the numerical order marked on the fixing screw on the heat sink (or diagonally) Tighten the screws one by one, turn a few times each time, and then unscrew one screw. Don't screw one screw to the end, rotate one by one until the balance is fixed.