Specifications: 4Kn Support: Yes
Hot Swap Capability: Yes
Insertion Rating: 50,000 cycles
Max Drive Capacity: Currently tested with up to 10TB 7200 RPM hard drives
Maximum Data Transfer Rate : 6 Gbps
S.M.A.R.T. Support: Yes
TRIM Support: Yes
Type and Rate: USB 3.0 - 5 Gbit/s / SATA III (6 Gbps)
UASP Support: Yes
Specifications: Interface: SATA
Connector Type(s): RJ-45
Enclosure Type: Steel
Package:
1 x Dual 2.5" Mounting Bracket
1 x SATA Power Y cable
2 x SATA DATA Cable
Size: Please Note As Hot Plug only means that the PC doesn't have to be restarted after disk swaps, it is crucial to disconnect and switch off the docking station before removing and changing any disk drives, to avoid data loss and structural damage. Please make sure the device is powering
Dimensions: Height:3.4" x Width:6.7" x Depth:11.4"
Specifications: Chipset ID: VL812+ASM1053E
Color: Black
Compatible Drive Types (Type and Rate): SATA
Drive Connectors: SATA Data & Power Combo (7+15 pin) Receptacle
Drive Installation: Removable
Drive Size: 2.5in & 3.5in
Enclosure Type: Plastic
Fan(s): Yes
Fans: 40 mm
Host Connectors: USB 3.0 B (9 pin ; SuperSpeed) Female
Humidity: 20%RH ~ 80%RH
Included in Package: Instruction manual
Universal power adapter (NA/EU/UK/AUS)
USB 3.0 4-Bay 2.5/3.5" SATA SSD/HDD Dock
USB 3.0 Cable
Input Current: 2.5A
Input Voltage: 100 ~ 240 AC
Insertion Rating: 15,000 Cycles
Interface: USB 3.0
LED Indicators: Drive power/activity LED
Max Drive Capacity: Currently tested with up to 4TB 7200 RPM 3.5" hard drives per bay (8TB total) and 2TB 5900 RPM 2.5" hard drives (2TB total)
Number of Drives: 4
OS Co...
Specifications: Color: Black
Drive Connectors: 1 - SFF-8482 (29 pin; Data & Power; Internal SAS) Receptacle
Drive Installation: Removable
Drive Size: 2.5in
Drive Type: SAS & SATA
Enclosure Type: Plastic
Fan(s): No
Host Connectors: 1 - SATA Data & Power Combo (7+15 pin) Plug
Key Lock: No
Max Drive Height: 0.59 in [15 mm]
Number of 2.5 inch bays: 1
Number of Drives: 1
Mobile Rack Drives Support: 1 x 3.5" Drives to 5.25" Bay
Mobile Rack Interface: SATA I/II
Specifications: Hard Drive Compatibility: 3.5-Inch SATA/300(SATA II) or SATA/150 (SATA I) Hard Drives
System Requirements: PC or Mac with a 5.25 Inch Drive Bay
Drive Drawer Dimensions: 7.5" x 5.8" x 1.6"
Cooling Fan: Ball-Bearing Fan
Fan Dimensions: 40 x 40 x 10mm
Fan Enclosure: Plastic
Drive Drawer Enclosure: Aluminum
Drive Size: Supports up to 750Gb hard drive
Note: Unit is model specific and is not meant for use with different models of drive drawer unless otherwise stated
Specifications: Connector(s):
1 - Drive Connectors: M.2 (PCIe, SATA, M-Key, NGFF)
1 - Host Connectors: USB 3.1 USB Type C (10 pin, Gen 2, 10 Gbps)
Interface: USB 3.1 Gen 2
Bus Type: USB 3.2 Gen 2 10Gbps
Number of Drives: 1
Drive Size: 22 mm - M.2 NVMe
Compatible Drive Types: M.2 (PCIe, NVMe, M-Key, NGFF)
Drive Installation: Fixed
Compatible Drive Types: M.2 SATA (NGFF, B+M-Key)
Supported Drive Height(s):
2230
2242
2260
2280
Chipset ID: Realtek - RTL9210B
1 - LED Indicators: Power & Activity
Maximum Data Transfer Rate: 10 Gbps
Type and Rate: USB 3.2 Gen 2 - 10 Gbit/s
UASP Support: Yes
TRIM Support: Yes
4Kn Support: Yes
Type and Rate: NVMe (PCIe Gen 3)
Insertion Rating:
USB-C: 10,000 cycles
M.2: 60 Cycles
General Specifications: Fully compatible with M.2 SATA, AHCI and PCIe NVMe based drive...
Specifications: Includes 1 x Combined 7+15 pin SATA plus LP4 Power to SATA Cable
Connectors 1x SATA 7 pin Female Connector
Connectors 1x SATA 15 pin Female Connector
Connectors 1x LP4 Male Connector