2pcs DD1718PA DC-DC Voltage Converter Module DC 3V-18V to ±5V/±6V/±9V/±12V/±15V/±24V Voltage Convert Board DC Step Up Boost Power Module (15V)

Description:
±5V: Input voltage DC3- 4.5V, output DC ±5V(Deviation is ±5%) Maximum input current 2A
Maximum output current: +V0 is 1A, -V0
is 200mA ±6V: Input voltage DC3-5V, output DC ±6V(Deviation is ±5%) Maximum input current 2A
Maximum output current: +V0 is 1A, -V0
is 200mA ±9V: Input voltage DC 3.3 -8V, output DC ±9V(Deviation is ±4%) Maximum input current 1.8A
Maximum output current: +V0 is 800mA, -V0
is 180mA ±12V: Input voltage DC 3.3 -11V, output DC ±12V(Deviation is ±4%) Maximum input current 1.8A
Maximum output current: +V0 is 700mA, -V0
is 150mA ±15V: Input voltage DC 3.3 -13V, output DC ±15V(Deviation is ±4%) Maximum input current 1.8A
Maximum output current: +V0 is 600mA, -V0
is 120mA ±24V: Input voltage DC 3.6 -18V, output DC ±24V(Deviation is ±4%) Maximum input current 1.8A
Maximum output current: +V0 is 400mA, -V0 is 100mA
Notes:
1. Input voltage can not be greater than the maximum input range.
2. Output power can not be greater than the maximum load for a long time.
3. Input power must be greater than the output power, because the power consumption of the module itself.
4. Due to the diode partial pressure, the voltage of -V0 is lower than +V0.
5. In order to obtain a more stable voltage, it is recommended that the output is greater than 15MA.
6. The -V0 cannot be used alone, or no voltage output. But you can just use +V0
Package included: 2 x DD1718PA DC-DC Voltage Converter Module(Two Same boards, not mixed types)