9139 For Switch PRO / Lite Bluetooth Wireless Controller PC Android PS3 Burst Screenshot Module Somatosensory Controller

9139 For Switch PRO / Lite Bluetooth Wireless Controller PC Android PS3 Burst Screenshot Module Somatosensory Controller

Specification:

Model: PG-9139

Operating voltage: DC3.7V

Working current: <35ma

For continuous use: more than 15 hours

Sleep Current: <40ua

Charging voltage / current: dc5v / 500ma

Bluetooth 4.0, transmission distance: 8 8 m

Battery capacity: 650 mah

Standby time: 30 days at full power

Controller operating instructions:

N-switch mode:

1. pairing connection: press the small button on the right side of the back for 1 second to enter the bluetooth pairing state. The 1-4 led indicator light flashes in the marquee mode, and the medium color led light flashes in 7 colors. If the pairing is successful within 2 minutes, the fist will go to sleep.

2. successful pairing: after the bluetooth pairing is successful, the LED1-4 indicator light is always on according to the standard channel assigned by the host, and the medium color light enters the 7-color cycle and flashes slowly (the interval between each color is 3 seconds).

3. rear pairing connection: press the home button for 1 second to enter the bluetooth connection state, the LED1-4 indicator light flashes in marquee mode, and the medium color led light flashes in 7 colors.

PC mode:

1. connection method: directly connect the computer and the handle with the data cable; xinput leds 1, 2 and 3 are always on.

In dinput mode, leds 1 and 2 are always on; in both modes, the central flashlight enters the 7-color slow flash (3 seconds between each color) state.

Programmable button function:

1. the programming function can perform any of a, b, x, y, l, zl, r, zr.