Your Browsing History
Meet Your Seller
Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle White
- New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots.
- High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape.
- Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800.
- Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles.
- Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis.
+
+
Overview
Specs
Reviews
Vertical Your GPU, Best Visual Angle.
Nowadays, the graphics cards on the market are getting bigger and bigger and the appearance is very eye-catching, the new released vertical graphics card mount allows vertical installation of a GPU on any chassis to better show off the visual design of the GPU and its cooler.
Bigger Graphics Card Support Verified
Supports most 1, 2, and 3 slot graphic cards.
Designed for most full/mid ATX tower with at least 7 available PCI slots.
Compatible with most brand's Graphic card
L-Shaped Bracket for Supporting heavy card
Optional install, assembling with heavy card prevent sagging.
Small Rubber pad could be attached to the L-shaped bracket.
Maximum support up to 1.89in/48mm.
Equipped With PCIE4.0 Riser Cable
Cable length 6.69in/17cm.
Exclusive Design of cable and connector for Gen 4 PCIE.
Supports PCIE 4.0/3.0/2.0/1.0.
Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800.
Assemble the graphics card and GPU Mount first, then adjust and lock the riser cable screw.
NOTE:
Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount.
Please refer to length spec image and confirm that there is enough space of your chassis.
INSTALLATION
1.Assemble Metal Part.
2.Put On Riser Cable.
3.Connect GPU To The Riser Cable.
Insert the graphics card into the riser cable connector, and tighten the screws.
In this step, do not mount the screw of the riser cable.
4.Mount the screw of riser cable and connect to motherboard PCIEx16_1 slot.
5.Lock the bracket to the chassis and adjust the stretch distance.
6.Optional assembly of L-shaped support bracket.
Nowadays, the graphics cards on the market are getting bigger and bigger and the appearance is very eye-catching, the new released vertical graphics card mount allows vertical installation of a GPU on any chassis to better show off the visual design of the GPU and its cooler.
Bigger Graphics Card Support Verified
Supports most 1, 2, and 3 slot graphic cards.
Designed for most full/mid ATX tower with at least 7 available PCI slots.
Compatible with most brand's Graphic card
L-Shaped Bracket for Supporting heavy card
Optional install, assembling with heavy card prevent sagging.
Small Rubber pad could be attached to the L-shaped bracket.
Maximum support up to 1.89in/48mm.
Equipped With PCIE4.0 Riser Cable
Cable length 6.69in/17cm.
Exclusive Design of cable and connector for Gen 4 PCIE.
Supports PCIE 4.0/3.0/2.0/1.0.
Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800.
Assemble the graphics card and GPU Mount first, then adjust and lock the riser cable screw.
NOTE:
Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount.
Please refer to length spec image and confirm that there is enough space of your chassis.
INSTALLATION
1.Assemble Metal Part.
2.Put On Riser Cable.
3.Connect GPU To The Riser Cable.
Insert the graphics card into the riser cable connector, and tighten the screws.
In this step, do not mount the screw of the riser cable.
4.Mount the screw of riser cable and connect to motherboard PCIEx16_1 slot.
5.Lock the bracket to the chassis and adjust the stretch distance.
6.Optional assembly of L-shaped support bracket.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 90 days
- Return for replacement within: 90 days
- This item is covered by QURO Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...