Weastlinks PCIE PCI-E to 2 Port SATA 1X 4X 8X 16X PCI-E Cards PCI Express to 2 SATA 3.0 2-Port SATA III 6Gbps Expansion Adapter Boards

Features:


1. Compliant with Serial ATA Specification 3.0, down compatible with SATA 2.0 SATA 1.0.

2. Conformance to PCI-Express v 2.0 specifications, down compatible with PCI-Express v 1.0.

3. Supports communication speeds of 6.0G bps, 3.0G bps and 1.5G bps.

4. Supports Gen 1i, Gen 2i, Gen 2m, Gen 2x and Gen 3i.

5. Supports two SATA Ports.

6. Supports AHCI 1.0 and IDE modes.

7. Supports Native Command Queuing (NCQ)

8. Supports Port Multiplier FIS based switching or command based switching.

9. Supports Hot Plug and Hot Swap.

10. Compatible with SATA 6G, 3G and 1.5G Hard Drives

Specification:
Product interface: PCI-E 1X 4X 8X 16X
Chipest: Marvel 9125
Support specification: SATA 3.0 7PIN
Bus interface: PCI-Express X1 slot
Extension interface: 2 SATA 3.0 interfaces
System requirements: there is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16
Operating system: Windows10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux

Kind Tips:

1. With SATA 3.0 data cable to achieve the best results.
2. PCI-E X1 or X16 must be it is V 2.0 version, PCI-E V 1.0 speed will not exceed 250M, we suggest directly inserted On the X16 slot, the pci-e x16 usually is v 2.0
3.
BOIS setting of the motherboard: SATA mode should be changed to AHCI, although some motherboard PCIE is version 2.0, but BOIS does not enable high-speed transmission mode by default (gen2 high speed mode) needs to be manually turned on. Thanks!

Package included:
1 x PCI-E to SATA 3.0 Extension Card