Air Mouse Voice Remote Control With 2.4G USB Receiver Gyro Sensing Wireless Smart Remote For Android TV BOX PC

Basic function:

1The 2.4G keypad function

2The air mouse control function

3The Infrared learning function(you can learn it through the 'power' button)

Pairing instructions 

After insert the receiver into Usb interface, hold down the ''ok'' button and 'menu' button on the remote controller at the same time for about 2 seconds; the LED light quick flashing shows entering the close range pairing mode.

The red led light stop flashing to indicate that the pairing is successful.

If paired failure, the red LED light flashing and it will enter the sleep mode in 20 seconds.

Note: the remote controller and receiver are already paired before packed, do as manual when the remote controller and the receiver cannot use.

LED light indicator status

1)Not paired: the red light slow flashes; press any button the red light continuous flashing for 3 times.

2)Pairing: press once, the red light flash once, and hold down the button the light will stay on.

3)Low battery: the red light quick flashes .

Stand-by and the sleep mode

1Not paired: none operation for 5 seconds to enter the sleep mode.

2Pairing: fail to pairing in 20 seconds, the air mouse will enter the sleep mode directly.

3In the process of pairing:None operation in 15 seconds it will enter the sleep mode.

Special key function instruction

ok 'button: when the air mouse on, the left button is 'ok' button, when the air mouse off, the 'enter' button is 'ok' button.

The virtual mouse function(the gyroscope version can control the cursor movement through body feeling.) 

Recharge: default the air mouse is off.

The voice control function default supports the Google voice system.