JVFYI PCIe x1 D720202 2-Ports USB 3.0 Card Self-Power

Each USB port support Power supply 5V/3A output by itself

Hot-swapping feature allows you to connect/disconnect devices without powering down the system

Support Windows® XP/Vista/7 (32/64 bit),linux

System Requirements

Windows® XP/Vista/7/8/8.1/10/11 (32/64 bit)

One available PCI Express slot (Recommend PCI Express 2.0)

Package Contents

1 x USB 3.0 2-Port PCI Express Card

1 x Driver CD

1 x User Manual

Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer?s cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the card, carefully align the card?s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.

5. Replace the slot bracket?s holding screw to secure the card.

6. Replace the computer cover and reconnect the power cord.

Driver Installation

For Windows® XP/Vista/Win7 (32/64 bit)

1. Please insert the CD driver bound with USB 3.0 2-Port PCI Express Card into your CD-ROM Drive.

2. At the Windows desktop, click Start, Run.

3. Type D:\ USB3.0 NEC D720201-202\EXE \Setup.exe, click OK. (Change D: to match your CD-ROM drive letter)

4. Follow the on-screen instructions to complete the installation.

To Verify Driver Installation

Click on the ?Device Manager? tab in System Properties, which you access from the Windows Control Panel. You should see a ?Renesas Electronics USB 3.0 Host Controller? and a ?Renesas Electronics USB 3.0 Root Hub? under the ?Universal Serial Bus controllers? item.