JVFYI PCIe x1 USB3.0 2A2C 5Gbps Expansion Card

Complies with PCI Express Base Specification Revision 2.0

Single-lane (x1) PCI Express throughput rates up to 5Gbps

Compliant with Universal Serial Bus 3.0 specification Revision 1.0

Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices

Chipset: NEC D720201

USB Attached SCSI Protocol(UASP)mode

Max. 5V/3000mA power output to each USB 3.0 Port

Supports the following speed data rates as follows: Low-speed (1.5Mbps) / Full-speed (12Mbps) / High-speed (480Mbps) / Super-speed (5Gbps)

Built-in SATA 15-pin power connector for receiving extra power supply from system

Hot-swapping feature allows you to connect/disconnect devices without powering down the system

Support Windows® Win7/ Win8/Win8.1 /win10, 32 or 64bit, Linux base OS

Interface

PCI-Express X1

Connectors:

2 x USB3.0 Type AF Connectors, 2 x USB3.0 Type C Connectors

System Requirements

Windows® Win7/ Win8/Win8.1 /win10, 32 or 64bit, Linux base OS

Available PCI-Express x1/x4/x8/x16 slot

Package Contents

1 x PCIe x1 NEC720201 USB3.0 2A2C Expansion Card

1 x Users Manual

1 x Low profile bracket

1 x CD

Accessories

Hardware Installation

Step 1: Turn off your PC, unplug the power Card and open the case of PC.

Step 2: Remove the mini PCIe Slot cover as below.

Step 3: Plug USB3.0 PCIe card in mini PCIe Slot and install the bracket screw that secures the card to the computer chassis.

Step4: Replace the computer chassis cover ,reconnect the Computer Power Card and turn on your PC.

Driver Installation

For Windows XP, VISTA, 7 and Server 2008 Release 2

1. Please insert the CD driver bound with USB 3.0 4-Port PCI Express Card into your CD-ROM Drive.

2. At the Windows desktop, click Start, Run.

3. TypeUSB3.0 NEC720201-720202\EXE \Setup.exe, click OK.

4. Follow the on-screen instructions to complete the installation.

To Verify Driver Installation

Click on the Device Manager tab in System Properties, which you access from the Windows Control Panel. You should see a NEC USB 3.0 Root Hub and a Renesas Electronics USB3.0 Host Controller under the Universal Serial Bus controllers item.