JVFYI PCIe x1 D720202 2-Ports USB 3.0 Card

Supports 2 downstream ports for all speeds

Built-in 4-pin power connector for receiving extra power supply from system

Hot-swapping feature allows you to connect/disconnect devices without powering down the system

Support Windows® XP/Vista/7 (32/64 bit)win8.win8.1.win10.win11,linux

System Requirements

Windows® XP/Vista/7 (32/64 bit)win8.win8.1.win10.win11

One available PCI Express slot (Recommend PCI Express 2.0)

Package Contents

1 x USB 3.0 2-Port PCI Express Card

1 x Driver CD

1 x User Manual

Note: Contents may vary depending on country/market.

Hardware Description

Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computers cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the card, carefully align the cards bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.

5. Replace the slot brackets holding screw to secure the card.

6. Replace the computer cover and reconnect the power cord.

Driver Installation

For Windows® XP/Vista/Win7 (32/64 bit)

1. Please insert the CD driver bound with USB 3.0 2-Port PCI Express Card into your CD-ROM Drive.

2. At the Windows desktop, click Start, Run.

3. Type D:\ USB3.0 NEC D720201-202\EXE \Setup.exe, click OK. (Change D: to match your CD-ROM drive letter)

4. Follow the on-screen instructions to complete the installation.

To Verify Driver Installation

Click on the Device Manager tab in System Properties, which you access from the Windows Control Panel. You should see a NEC Electronics USB 3.0 Host Controller and a NEC Electronics USB 3.0 Root Hub under the Universal Serial Bus controllers item.

Support

More information and settings please refer to the User Guides or you can contact us.