Your Browsing History
- Free 30-day Returns
$93.46
Ships from China.
Meet Your Seller
anicorn 2PCS 2.4" 2.42 inch 128x64 OLED LCD Display Module SSD1309 12864 4 Pin IIC I2C Serial Interface for Arduino UNO R3 C51-Green
Limited time offer, ends 10/07 By CoreDepot
- 2.42" SSD1309 128x64 OLED Display Module , Widely Application: These OLED display can be used for Arduino, Raspberry Pi 5/4B/3B+/3B/2B/Zero, STM32, C51, ESP32 development board and so on; Low Power Consumption: Working voltage 3.3V/5V, compatible with 3.3V and 5V logic levels, no level conversion chip required, working current is only 52mA, power consumption is 0.26W, enhance system reliability and performance; Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate; Active display area: 55.01(W) x 27.49(H)(mm); Driver IC: SSD1309; Display interface: IIC; Pixel size: 0.43(H) x 0.43(V)(mm); Backlight brightness (typical): 110(cd/m2); Operating temperature
- 40~70(); Package:2.42" SSD1309 128x64 OLED Display Module 2.42 Inch OLED LCD Display Module IIC I2C 4 Pin
- Blue Light
+
+
Overview
Specs
Reviews
2.42" SSD1309 128x64 OLED Display Module, Widely
Application: These OLED display can be used for Arduino, Raspberry Pi 5/4B/3B+/3B/2B/Zero, STM32, C51, ESP32 development board and so on; Low
Power Consumption: Working voltage 3.3V /5V, compatible with 3.3V and 5V logic levels, no level conversion chip required, working current is only 52mA, power consumption is 0.26W, enhance system reliability and performance; Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate;
Active display area: 55.01 (W) x 27.49 (H) (mm);
Driver IC: SSD1309;
Display interface: IIC;
Pixel size: 0.43 (H) x 0.43 (V) (mm);
Backlight brightness (typical): 110(cd/m2); Operating temperature 40~70();
Package: 2.42" SSD1309 128x64 OLED Display Module 2.42 Inch OLED LCD Display Module IIC I2C 4 Pin Blue Light
Application: These OLED display can be used for Arduino, Raspberry Pi 5/4B/3B+/3B/2B/Zero, STM32, C51, ESP32 development board and so on; Low
Power Consumption: Working voltage 3.3V /5V, compatible with 3.3V and 5V logic levels, no level conversion chip required, working current is only 52mA, power consumption is 0.26W, enhance system reliability and performance; Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate;
Active display area: 55.01 (W) x 27.49 (H) (mm);
Driver IC: SSD1309;
Display interface: IIC;
Pixel size: 0.43 (H) x 0.43 (V) (mm);
Backlight brightness (typical): 110(cd/m2); Operating temperature 40~70();
Package: 2.42" SSD1309 128x64 OLED Display Module 2.42 Inch OLED LCD Display Module IIC I2C 4 Pin Blue Light
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 90 days
- This item is covered by CoreDepot Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...