Your Browsing History
We‘re shipping as usual! The Canada Post strike only affects certain remote deliveries and PO Boxes. Details
Holiday Shipping Details & Extended Holiday Returns
Meet Your Seller
Macro Mechanical Keyboard, One Handed Macro Mechanical Keyboard 12 Key Multifunction DIY Programmable Keypad for Office Gaming Labsecurity Accessories (Black)
- Multifunction: The mini keyboard with multi functions, you can set all the key functions on the for keyboard, and realize complicated and complex shortcut keys with one key.
- Bring You Convenience: This is a 12 key programmable keyboard with adjustment knob, you can set the shortcut keys to reduce the cumbersome process. Ostrich Model Figurines.
- Memory Function: The keyboard has a storage function, which can be used on systems that support usb protocol such as for , for OS X, etc. after setting it up on the for system.
- Settable Knob: The knob can also be set, with functions such as, play the previous song, the song, volume up, volume down, pause, play and other functions.
- Portable and Easy to Use: Type C to USB interface, no need for drivers, plug and play, no conflict between the computer and multiple keyboards, convenient and easy to carry.
- When you read the manual, please note that the product does not come with RGB function, but the product manual is a generic, which describes
+
+
Overview
Specs
Reviews
1. Small keyboard, open the custom software on the computer.
2. On the custom software, click the "key setting area" or "Knob setting area" (yellow area) and then click the key key1key12 or any key of knob 1 or knob 2 (green area) to be set; If selected, it will appear red.
3. Click the function key corresponding to the simulated keyboard on the custom software, click download, prompting download success, the custom keypad can be used. For example, if you want to set small keyboard key 1 as the shortcut key of copy (Ctrl+C), click "Key Setting area" on the software, click "KEY1", then click Ctrl and C on the software simulation keyboard, click Download, and the message "download successful" is displayed.
Common troubleshooting methods:
Problem 1: When the keyboard is connected to the computer, there is no response or a message indicating that the device is running abnormally.
Solution: Check whether the cable and interface are connected properly, and remove and reinsert them. Replace the USB port on the computer and plug it back in.
Fault 2: The custom software cannot be opened after being downloaded.
Solution: Check whether the antivirus software intercepts the operation and set it as a trusted file.
Question 3: After connecting the computer, why is it always "a" when pressing a key or knob?
Solution: Output a is the normal factory setting, please open the custom software to redefine the key function.
This software can only be run on for Windows system temporarily, try to download it on the PC side of the computer, the setting software does not need to be installed, it can be run directly after opening it, and it will be automatically stored on the chain disk after setting, and then plug it into the USB protocol that supports the USB protocol. Use on for Linux, for OS X and other systems (the first time you run it, pay attention to the release of antivirus software and set it as a trusted file)!
Q: How to download firmware?
A: Software download: one Drive: ; There is also software available for download in the attachment.
How to Use Note FAQ
2. On the custom software, click the "key setting area" or "Knob setting area" (yellow area) and then click the key key1key12 or any key of knob 1 or knob 2 (green area) to be set; If selected, it will appear red.
3. Click the function key corresponding to the simulated keyboard on the custom software, click download, prompting download success, the custom keypad can be used. For example, if you want to set small keyboard key 1 as the shortcut key of copy (Ctrl+C), click "Key Setting area" on the software, click "KEY1", then click Ctrl and C on the software simulation keyboard, click Download, and the message "download successful" is displayed.
Common troubleshooting methods:
Problem 1: When the keyboard is connected to the computer, there is no response or a message indicating that the device is running abnormally.
Solution: Check whether the cable and interface are connected properly, and remove and reinsert them. Replace the USB port on the computer and plug it back in.
Fault 2: The custom software cannot be opened after being downloaded.
Solution: Check whether the antivirus software intercepts the operation and set it as a trusted file.
Question 3: After connecting the computer, why is it always "a" when pressing a key or knob?
Solution: Output a is the normal factory setting, please open the custom software to redefine the key function.
This software can only be run on for Windows system temporarily, try to download it on the PC side of the computer, the setting software does not need to be installed, it can be run directly after opening it, and it will be automatically stored on the chain disk after setting, and then plug it into the USB protocol that supports the USB protocol. Use on for Linux, for OS X and other systems (the first time you run it, pay attention to the release of antivirus software and set it as a trusted file)!
Q: How to download firmware?
A: Software download: one Drive: ; There is also software available for download in the attachment.
How to Use Note FAQ
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 15 days
- Return for replacement within: 30 days
- This item is covered by POLING Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...