
- Frequency Band: 2.4 GHz / 5 GHz / 6 GHz
- Interface: PCIe Half Mini Card / M.2 (NGFF)
- Brand: Intel
- Model: AX210
- Model #: AX210.NGWG.NV
- Item #: 9SIADDZK118002
- Return Policy: View Return Policy
Easy installation, fast wifi connection, internet speed increased almost 100Mbps on laptop and enabled Wifi 6E!

- Frequency Band: 2.4 GHz / 5 GHz
- Standards: IEEE 802.11ax
- Security: Support 64/128 bit WEP, WPA/WAP2/WPA3, WPA-PSK/WPA2-PSK, 802.1x
- Modulation: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM, 1024QAM
- Model #: Archer TX20E
- Item #: 16R-00EE-00011
- Return Policy: Standard Return Policy
This was pretty easy to install. It did come with an install CD but I just downloaded what I needed from the website. Now you will have to have an ethernet cord or a usb wifi dongle to do this but it took like 5 minutes to figure all this out. It did not seem to connect until I had the software for it installed. Once installed I ran through a quick update to check and made sure it was the only wifi source and it has been working flawlessly ever since. (two weeks at this point)

- Brand: StarTech.com
- Type: Network Ethernet Cables
- Cat: 6
- Connector A: RJ45
- Model #: N6LPATCH50BL
- Item #: N82E16812399450
- Return Policy: Standard Return Policy

- Type: PCIE Wi-Fi Adapter
- Model #: WB001
- Item #: 9SIAZVYH0S2739
- Return Policy: View Return Policy

- Frequency Band: 2.4 GHz / 5 GHz / 6 GHz
- Standards: IEEE 802.11a/b/g/n/ac/ax
- Security: WEP, WPA/WPA2/WPA3, WPA-PSK/WPA2-PSK
- Transmitted Power: 5 GHz: 20dBm(FCC) /15dBm(CE) (EIRP) 2.4 GHz: 20dBm(FCC) / 16dBm(CE) (EIRP) 6 GHz: 12dBm(FCC)
- Model #: Archer TXE72E
- Item #: N82E16833704664
- Return Policy: Standard Return Policy
Easy setup, works out of the box.

- Brand: StarTech.com
- Type: Consumer Electronics
- Cat: 6
- Connector A: 1 x RJ-45 Male
- Model #: N6PATCH30BK
- Item #: N82E16812400956
- Return Policy: Standard Return Policy

- Wireless Data Rates: 600 Mbps (200 Mbps on 2.4 GHz, 433 Mbps on 5 GHz)
- Frequency Band: 2.4 GHz / 5 GHz
- Interface: USB 2.0
- Brand: TP-Link
- Model #: ARCHER T2U PLUS
- Item #: N82E16833704471
- Return Policy: Standard Return Policy
So easy t use windows 10 see them with no probem

- Model #: UACC-ETH-SP-DIN
- Item #: N82E16812294029
- Return Policy: Standard Return Policy

- Wireless Data Rates: Up to 1.3Gbps
- Frequency Band: 2.4 GHz / 5 GHz
- Interface: USB 3.0
- Brand: TP-Link
- Model #: Archer T3U Plus
- Item #: N82E16833704529
- Return Policy: Standard Return Policy
averages 250 mb/s down and 290 mb/s up on ATT fiber for a 300 mb/s account.

- Wireless Data Rates: AC1200
- Frequency Band: 2.4 GHz / 5 GHz
- Standards: IEEE 802.11ac, IEEE 802.11a/b/g/n
- Security: WPA2
- Model #: WIFI5
- Item #: 9SIAMXWHCG1701
- Return Policy: View Return Policy
The only thing I care about is compatibility with Linux, and I am happy to report that I plugged this thing into the motherboard yesterday, and it appears to work perfectly without installing anything. I didn't even install the drivers that came on the CD. I have only owned this thing one day, but things are good so far. Immediately after plugging in the card and booting up, I was able to use 'ip address' to see the card present (but no IP, since I hadn't set up networking obviously). Then, I edited /etc/netplan/_your_config.yaml with my wifi configuration. I ran sudo netplan --debug apply and the interface did not appear to pickup an IP address. The output of 'ip address' showed that the state of the interface was 'down', so I though I might have been missing firmware, so I messed around for a while trying to get my sources.list set up for 'contrib' and 'non-free', but turned out to not be necessary. I did install a few debugging tools, but I don't think any of them contributed to making it work. I was using 'connmanctl' command to debug the interface when I realized that it was already connected and working perfectly. I think my problem was not rebooting after running the netplan apply. Here is my kernel version/stack: uname -a Linux host 5.15.0-43-generic #46-Ubuntu SMP Tue Jul 12 10:30:17 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 22.04.1 LTS Release: 22.04 Codename: jammy (server version) I observed transfer speeds of 17.7 MB/s, which is more than enough for my needs.

- Wireless Data Rates: 802.11a: 6,9,12,18,24,36,48,54 Mbps 802.11b: 1, 2, 5.5, 11 Mbps 802.11g: 6,9,12,18,24,36,48,54 Mbps 802.11n: up to 300 Mbps 802.11ax (2.4GHz): up to 600 Mbps 802.11ax (5GHz): up to 2402 Mbps
- Frequency Band: 2.4 GHz / 5 GHz
- Standards: IEEE 802.11a/b/g/n/ax
- Antenna: External Antenna
- Model #: PCE-AX58BT
- Item #: 9SIA7BBKH72065
- Return Policy: View Return Policy
Pull out old WiFi card plug in new, install driver and it all works.

- Wireless Data Rates: AXE5400 / Up to 5.4Gbps
- Frequency Band: 2.4 GHz / 5 GHz / 6 GHz
- Type: PCIE Wi-Fi Adapter
- Color: Black
- Model #: Archer TXE75E
- Item #: 9SIA7BBJN08922
- Return Policy: View Return Policy
Very easy to get, and install.

- Frequency Band: 2.4 GHz / 5 GHz / 6 GHz
- Interface: PCI Express
- Brand: MSI
- Part Number: 914-8660-001
- Model #: 914-8660-001
- Item #: 9SIA9H5KXA9614
- Return Policy: View Return Policy

- Wireless Data Rates: Speed up to 2400Mbps (The router must support 802.11ax)
- Frequency Band: 2.4Ghz/5Ghz/6Ghz
- Type: M.2 Wi-FI Adapter
- Standards: IEEE 802.11ax/ac
- Model #: AX210 Kit
- Item #: 9SIASPTKAP0815
- Return Policy: View Return Policy
Much better 5GHz connectivity than my old wifi 5 card. Has more bars and has a higher ping at 5GHz Good connection with 2.4GHz, I'd say its about the same as my older card(s), but this is not a complaint since I'm switching over to 5GHz Easy to install, clip on the antennae and you're done. Low profile bracket. FOSS drivers.

- Brand: StarTech.com
- Type: Network Cable
- Cat: 6
- Length: 1 ft.
- Model #: C6PATCH1BL
- Item #: N82E16812200031
- Return Policy: 15/30 Return Policy

- Wireless Data Rates: WiFi 6 (802.11ax) (2.4GHz) : up to 574 Mbps WiFi 6 (802.11ax) (5GHz) : up to 1201 Mbps
- Type: USB Wi-FI Adapter
- Standards: WiFi 6 (802.11ax) Backwards Compatible with 802.11a/b/g/n/ac Wi-Fi
- Model #: 302-8ZE00XU-000
- Item #: N82E16833158035
- Return Policy: Standard Return Policy
Fast Interesting Works well Good design

- Type: M.2 Wi-FI Adapter
- Antenna: Internal Antenna
- Model #: 16012
- Item #: 9SIC7B7M1K3965
- Return Policy: View Return Policy

- Brand: StarTech.com
- Type: Snag-less
- Cat: 6
- Connector A: 1 - RJ45 Male
- Model #: N6PATCH75BK
- Item #: N82E16812200895
- Return Policy: 45/1 Return Policy
- Performs exactly as anticipated.

- Brand: TP-Link
- Type: Bluetooth Adapter
- Standards: Bluetooth 5.3
- System Requirements: Supported operating systems include Win 11/10/8.1/7
- Model #: UB500 Plus
- Item #: N82E16833704765
- Return Policy: Standard Return Policy
Works in Linux

- Wireless Data Rates: Tri-band 2.4G/5G/6G
- Frequency Band: 2.4 GHz / 5 GHz / 6 GHz
- Part Number: 16781
- Standards: 802.11ax/ac/a/b/g/n
- Model #: 16781
- Item #: 9SIC7B7M1K3988
- Return Policy: View Return Policy
Easy installation no drivers update needed 5G and Bluetooth connection is fast