BEST SELLERS

In CPU Air Coolers

- Looks nice - Cools well

Runs beautifully for my budget build has zero problems gaming wise ( I mainly play rust which is a cpu heavy game)

Easy install Good temps for such a thin heat sink All black Cool Master duh

Temps dropped by 30° on my R5 3600 Easy install Includes pre applied thermal paste Mounting method makes upgrading CPUs much much easier with the secondary bracket design.

Great, it has a 270 watt tdp and it looks cool

Be Quiet Dark Rock 5 PRO is the BEST air cooling solution for INTEL socket 1700 and AMDs as well!!!!! IT is huge, I broke down 5 computers trying to find a case it fit in! Some of which I am parting out, and others that need to be re-assembled! I had two cases that it would fit in, and one has an 8inch fan in the side, that I didn't want to take out to make room for this huge heatsink, so that left me with an NZXT case which only fit in because the fan was lower than the heatsink! The Dark Rock 5 has a TDP of 210, which I returned for the Dark Rock 5 PRO with a TDP of 270. I am running a i9-14900k, & a i7-14700k, they both idle around 29c. Under stress test mid 50s to mid 60s. One test it "popped up" to 71-73c for very brief seconds! I get NO THROTTLING from high temp or lack of power! Currently running i9 @ 5ghz ALL CORE! The i7 4.8ghz ALL CORE, but pretty sure I can take it up to 5ghz & stay at the same temps, with a little tweaking of the AC/DC Load-Line! GERMAN ENGINEERING what more needs to be said! Most people are saying you HAVE to use a water cooler on these hot i7s & i9s, but these Dark Rocks ROCK!!!! I did use liquid metal. Those that say you have to worry about RAM clearance, I have no clue! I am running 4 sticks of Corsair Vengeance, and I have the fan as low as it will goo, and I can still fit a piece of cardboard from a notebook between the fan & RAM sticks. Keep in mind the fan is designed where it can be raised a bit. SO put the RAM clearance out of your mind! OH, and the clip on fan are no trouble at all! AND the center fan comes out easy, don't know why some of the folks make comment about that. I seated & unseated it quite a few times! For me the "CPU fan header" was the pain in my?

- easy to mount to motherboard - single connector to motherboard. - need to remove a single fan to mount

-Price -Easy to install (AMD 4/5) -Nearly as good as Noctua (1-2 degrees less) -Quiet

Purchase and tech support was great. Fan comes with a thermal paste applied and everything needed. Easy to assemble. Unfortunately my ram cards were too tall so the fan could clear over them and had to return.

- Easy modern mounting for AM5 - Good even contact - Great temperatures - Idle 35c / Prim95 60c / Peak 69c - Looks good - Good build quality - I think the fans sound fine, at high loads they ramp up and get louder, but its a smooth sound without any annoying hub whine or other jarring fan sounds. - Includes a fan splitter & speed switch for High 2000+ RPM, PWM default, and low 1800 RPM settings. I left mine on default PWM motherboard controlled. - Premium packaging materials and unboxing experience

-Matches my case and the smooth outer ring of LEDs looks particularly nice. -Coupled with Thermal Grizzly Duronaut paste, my cpu is running 28C at idle and maxing out at 63C under sustained stress test. Granted, the Ryzen 5 5500GT isn't the spiciest processor out there, but I've never had ANY processor, better or worse, run so cool.

Feels like its built well fans are quite and definitely keeps everything cool

- great price on special - good quality - good looking - 5 cooling pipes - slim design - amazing packaging

ARGB Fans Incredible price to performance Easy to install Good aesthetics

works great for my 265kf standard easy install

Two 120mm aRGB fans