Features: Capacity for 50+ games*
High-speed USB 3.0 gives you full-speed gaming like playing fromyour PS4's internal drive
Plugs directly into any USB port on your PS4
Simple PS4-guided setup takes approximately 3 minutes
Built and tested for gaming on PS4
Game anywhere with easy setup and portability**
Compatible with any generation of PS4 (system software version
System Requirements: PS4 or PS4 Pro system* **
USB 3.0 port (required for USB 3.0 transfer speeds or backwards compatible with USB 2.0 ports at USB 2.0 transfer speeds)***
* Formatting may be required.
** Requires System Software 4.50 or higher.
*** Compatibility may vary depending on user's hardware configuration and operating system.
Package Contents: The Mandalorian Drive Special Edition FireCuda External Hard Drive
18-inch (45.72cm) USB 3.0 cable
Rescue Data Recovery Services
Quick Install Guide
Package Contents: Toshiba Canvio Advance Portable Hard Drive
USB 3.0 Cable (works with USB 2.0)
Quick Start Guide
Downloadable Software*
* Software is available via a free download that is subject to Toshiba Electronic Devices & Storage Corporation's and/or Toshiba America Electronic Components, Inc.'s standard End User License Agreement. Software is compatible with Windows PC only.
Specifications: 4Kn Support: Yes
Hot Swap Capability: Yes
Insertion Rating: 50,000 cycles
Max Drive Capacity: Currently tested with up to 10TB 7200 RPM hard drives
Maximum Data Transfer Rate : 6 Gbps
S.M.A.R.T. Support: Yes
TRIM Support: Yes
Type and Rate: USB 3.0 - 5 Gbit/s / SATA III (6 Gbps)
UASP Support: Yes
Audio Chipset: Sound Blaster Acoustic Engine, Super X-Fi
SNR: 114dB
Operating Systems Supported: Windows® 10 Ver 1703, macOS 10.15 and above, Windows® 11
System Requirements: Windows® OS
Intel® Core™i3 or AMD® equivalent processor
Intel, AMD, or 100% compatible motherboard
Microsoft® Windows 11, Windows 10 32 / 64-bit Ver 1703 or higher
> 4 GB RAM
> 4 GB of free hard disk space
USB 2.0 / USB 3.0 port
macOS
macOS X® 10.15 or higher
Supports Intel-based and Apple CPU chipsets
> 4 GB RAM
USB 2.0 / USB 3.0 port
PS5
Firmware Version 20.02-2.26.00.00-00.00.00.0.1 or later
Available USB port
Audio Balance feature requires a HDMI to Optical converter (not included)
PS4
Firmware Version 5.0 or later
Available USB port
Available Optical-out port (for Audio Balance)
Nintendo Switch
Switch OS 5.0 or later
Available 3.5 mm headphon...
Package Contents: USB 3.0 to M.2 SATA External SSD Enclosure with UASP
1 x USB 3.0 Cable
1 x SSD screw kit
1 x Mini Screw Driver
1 x Instruction Manual
Specifications: Chipset ID: JMicron - JMS580
Drive Size: 22mm - M.2 SATA
Supported Drive Height(s): 2242 / 2260 / 2280
Compatible Drive Types: M.2 (SATA, B-Key, NGFF) / M.2 SATA (NGFF, B+M-Key)
Maximum Data Transfer Rate: 6 Gbps
MTBF: 50,000 hours
TRIM Support:Yes
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes
Drive Connectors: 1 - M.2 (SATA, B-Key, NGFF) Receptacle
Host Connectors: 1 - USB Type-C (24 pin) USB 3.1 (10Gbps) Male
Note:
Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.