Specifications: Includes height-adjustment column, desk clamp, LCD pivot, worksurface/keyboard, one (1) USB extension cable, one (1) cable wrap
NOTE: Extra-long cables are required to span between standing and sitting heights
Optimized for desks that are 30"-36" deep (76-91 cm): on desks shorter than 30", worksurface will extend beyond desktop edge; on desks deeper than 36", worksurface will not extend to desktop edge
Worksurface Dimensions: 29.5" x 21.8" (75 x 55.4 cm)
Weight Capacity: Maximum total load on height-adjustment assembly = 16 lbs (7.3 kg). LCD weight = 3-13 lbs (1.3-5.9 kg); worksurface = 5 lbs (2.3 kg)
LCD and keyboard adjust 18" (46 cm) in tandem; LCD adjusts 5" (13 cm) independently; maximum LCD height adjustment = 23" (58 cm)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 ...
Specifications: Large Keyboard Tray for WorkFit-S Sit-Stand Workstation (black)
Includes single-piece keyboard tray and mounting hardware
Tray Dimensions: 0.25" H x 27" W x 9 "D (6 x 685 x 226 mm)
Can be attached centered on the workstation or offset to the right or left using alternate mounting holes; also may be installed only using back mounting holes to increase the distance between the keyboard and monitor
Specifications: LCD Size: <=24"
Capacity: 8-33 lbs
Mounting Standards: VESA FDMI MIS-D, 100/75 (hole pattern: 100 x 100 mm & 75 x 75 mm)
Monitor pans left/right up to 50° (varies per size of monitor)
Fold-down keyboard with built-in mouse pad surface
Keyboard tray extends out up to 5" (12.7 cm) inches when in use
Keyboard tray pans left/right up to 120°
Scanner and mouse holder integrated into the keyboard tray
Back-tilt keyboard tray adjustable (0 to -10 degrees)
Integrated cable management system can be configured on either side
Easy-to-clean exterior
Specifications: Includes height-adjustment column, desk clamp, crossbar, two (2) LCD pivots, worksurface/keyboard, one (1) USB extension cable, two (2) cable wraps
NOTE: Extra-long cables are required to span between standing and sitting heights
Optimized for desks that are 30"-36" deep (76-91 cm): on desks shorter than 30", worksurface will extend beyond desktop edge; on desks deeper than 36", worksurface will not extend to desktop edge
Worksurface Dimensions: 29.5" x 21.8" (75 x 55.4 cm)
Maximum outside width of display is 24.5" (62 cm) when display is 2" (5 cm) thick. Accommodates most displays with screen-size up to 24" as well as some displays with screens as large as 26". Actual allowable width of displays will vary depending on display thickness
Weight Capacity: Maximum total load on height-adjustment assembly = 25 ...
Specifications: Cable Manager: Cable Management Kit (grey).
Includes:
one (1) piece of 30" (76 cm) cable wrap, two (2) pieces of 11" (28 cm) cable management channel, two (2) adhesive strips, four (4), mounting screws, and four (4) hollow wall anchors.
Cable Channel Dimensions: 11.25" x 1.75" x 0.75" (286 x 44 x 19 mm)
Specifications: Maximum outside width of display is 24.5" (62 cm) when displays are 2" (5 cm) thick. Accommodates most displays with screen-size up to 24" as well as some displays with screens as large as 26". Actual allowable width of displays will vary slightly depending on display thickness
Specifications: Tablet/Document Holder for WorkFit-S Workstation (black)
Includes document holder, handle, mounting hardware
Cannot be added to system where Worksurface accessory 97-581-019 is installed
Use of Tablet/Document Holder may reduce WorkFit’s 5" (13 cm) independent height adjustment range for displays
Weight Capacity: 2.2 lbs (1 kg)
When this accessory is added to the WorkFit-S, total weight capacity of the workstation is reduced by 1 lbs (.45 kg)
Specifications: Part Number: 97-991
Description: SV Supplemental Storage Drawer, Double (grey/white)
Includes drawer assembly, two medium drawers, dividers
* Stated capacity represents maximum load per individual medium drawer
Internal Dimensions (individual drawer): 2.5"H x 5.5"W x 10.5"D (63.5 x 140 x 267 mm)—includes dividers to configure up to 4 compartments
The primary drawer must be the first drawer attached to the cart. This supplemental drawer attaches to the underside of the primary or other supplemental drawer
Drawer features key-lock access
This drawer is manually operated. It does not interface with a cart’s electrical or auto-locking drawer systems
Purchase a travel-stop accessory if installing 3 or more standard-height drawer rows or 2 or more tall drawer rows. Contact...
Specifications: Includes stand, CPU strap, buckle cover, VESA monitor mounting kit, cable ties
* Weight Capacity: 6 - 16 lbs. for display; total stand capacity = 37 lbs for combined weight of display, CPU, keyboard and mouse
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Meets tip test requirements of UL Specification 1678
Compatible with most 15" - 24" displays, and most small or ultra small form factor CPUs, notebook computers, and gaming consoles
Maximum CPU size = 14" H x 4" D (36 x 10 cm); minimum CPU size = 7" H x 1.8" D (18 x 4.6 cm). The CPU should be centered on the stand
Motion may be restricted when using 22" - 24" monitors in portrait mode
Removal of lock screw allows portrait to landscape rotation
Mounting Option: Two M4 threaded screw inserts are located at the bottom of ...