Specifications: K-Lock Slot: Kensington Standard Slot (K-Slot)
Included in Package:
1 x Laptop Combination Lock
1 x Hook-and-Loop Strap
1 x Quick-Start Guide
Specifications: Included in Package: Black leather holder
Instruction Manual
Remote Cable Tester
LED Indicators: Battery condition
Center conductor
Conductor indicators
Connected or 25 Ohm detected
No cable / No terminator
Non-parallel or 50 Ohm detected
Shielding
Short circuit detected
Product Height: 25 mm [1 in]
Product Length: 180 mm [7.1 in]
Product Weight: 250 g [8.8 oz]
Product Width: 110 mm [4.3 in]
Shipping (Package) Weight: 0.4 kg [0.9 lb]
Specifications: Form Factor: Horizontal
Number of Power Outlets: 8
Rack-Mountable: Yes
Load Capacity: 1920 VA
Maximum Output Voltage: 240V
Maximum Total Current: 20A
Maximum Total Current Draw per Phase: 20A
Nominal Input Voltage: 110V - 240V
Nominal Output Voltage: 110V - 240V
Phase Power: Single phase power adapter
Power Cord Included: 10 ft [3m] C19 to NEMA5-20p
Regulatory Derated Input Current (North America): 16A
Surge Protection: 3600 Joules
Input Connector(s): 1 - IEC C20 (16A, 3 conductor) Power Plug Input
Output Connectors: 8 - IEC C13 (10A, 3 conductor) Power Receptacle Receptacle Output
Input Voltage: 110V - 240V AC
Included in Package
1 x rack-mount PDU
1 x 10 ft [3m] C19 to NEMA5-20p power cord
4 x M5 screws
4 x M5 cage nuts
1 x instruction manual
Specifications: Drive Connectors: 1 - 29 pin SAS SFF-8482 Female Female
Host Connectors: 1 - 22 pin SATA DATA and Power Combo Male Male
1.70" x 7.10" x 5.70"
14.10 oz.
Specifications: Includes 1 x Combined 7+15 pin SATA plus LP4 Power to SATA Cable
Connectors 1x SATA 7 pin Female Connector
Connectors 1x SATA 15 pin Female Connector
Connectors 1x LP4 Male Connector
Specifications: Drive Connectors: 1 - M.2 (NGFF) Receptacle
Host Connectors: 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Maximum Data Transfer Rate: 6 Gbps
Type and Rate: SATA III (6 Gbps)
Specifications: Connector(s):
1 - Drive Connectors: M.2 (PCIe, SATA, M-Key, NGFF)
1 - Host Connectors: USB 3.1 USB Type C (10 pin, Gen 2, 10 Gbps)
Interface: USB 3.1 Gen 2
Bus Type: USB 3.2 Gen 2 10Gbps
Number of Drives: 1
Drive Size: 22 mm - M.2 NVMe
Compatible Drive Types: M.2 (PCIe, NVMe, M-Key, NGFF)
Drive Installation: Fixed
Compatible Drive Types: M.2 SATA (NGFF, B+M-Key)
Supported Drive Height(s):
2230
2242
2260
2280
Chipset ID: Realtek - RTL9210B
1 - LED Indicators: Power & Activity
Maximum Data Transfer Rate: 10 Gbps
Type and Rate: USB 3.2 Gen 2 - 10 Gbit/s
UASP Support: Yes
TRIM Support: Yes
4Kn Support: Yes
Type and Rate: NVMe (PCIe Gen 3)
Insertion Rating:
USB-C: 10,000 cycles
M.2: 60 Cycles
General Specifications: Fully compatible with M.2 SATA, AHCI and PCIe NVMe based drive...
Specifications: Secure cables and dongle adapters in boardrooms, workstations and other areas to help prevent against costly theft or accidental loss. These steel security tether cables provide a measure of physical security, by letting you attach your cables and adapters to each other.
Protect your Investment
The 20-pack of universal cable tethers give you an easy and cost-effective way to minimize the need to constantly replace cables in lobbies, public areas, work and meeting areas. They provide a measure of anti-theft by securing your cables and adapters, while also keeping cables organized by making sure you always have the right adapter or cable in the right place.
The Strength of Steel
The cable and adapter tethers are made of a thin durable steel cable with a PVC coating, providing an effective theft deterrent.
Fast and Easy Installation
The flexible steel...