Specifications: Includes height-adjustment column, desk clamp, crossbar, two (2) LCD pivots, worksurface/keyboard, one (1) USB extension cable, two (2) cable wraps
NOTE: Extra-long cables are required to span between standing and sitting heights
Optimized for desks that are 30"-36" deep (76-91 cm): on desks shorter than 30", worksurface will extend beyond desktop edge; on desks deeper than 36", worksurface will not extend to desktop edge
Worksurface Dimensions: 29.5" x 21.8" (75 x 55.4 cm)
Maximum outside width of display is 24.5" (62 cm) when display is 2" (5 cm) thick. Accommodates most displays with screen-size up to 24" as well as some displays with screens as large as 26". Actual allowable width of displays will vary depending on display thickness
Weight Capacity: Maximum total load on height-adjustment assembly = 25 ...
Specifications: Includes fully assembled arm, wall mount base, mounting hardware
Can be configured to hold a laptop instead of an LCD display; also order the accessory Notebook Tray (50-193-200)
Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
Arm folds back over the base into a compact retracted position—space between wall and VESA plate is just 4.4" (11 cm) when fully retracted
Mounting Options: Attaches directly to sturdy vertical surfaces. Where applicable, install to wood stud. Also attaches to Wall Track using bracket 97-091 (order separately)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Tilt Range: 90° backward, 90° forward
Pan Range: 180° at base; 360° between extension and arm
Extension Range: 2...
Specifications: # of Displays Supported: 1
Articulating: No
Cable Management: Yes
Mounting Options: Wall-Mount
VESA Hole Pattern(s): 75x75 mm / 100x100 mm
Display Pan: +180° / -180°
Display Rotation: 360°
Display Tilt: +90° / -15°
Height Adjustment: No
Maximum Arm Extension: 10.2 in [260 mm]
Maximum Display Size: 30in
Minimum Display Size: 13"
Weight Capacity (Per Display): 30.9 lb [14 kg]
Swivel / Pivot:
+180°/-180° at the wall
360° at the elbow
Included in Package:
1 x Wall Mount
1 x Swivel Arm
1 x Monitor Mount
1 x M3 Hex Key
4 x Thumb Screws
2 x Wall Plugs
2 x Mounting Screws
1 x User Manual
Specifications: Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
LCD Size: 30"
Capacity: 31 lbs
Rotation: 360° P/L
Attaches to Crossbar and Crossbar Extenders
Cannot be used as the Center Display Bracket when three displays are attached to Crossbar
Install displays with 4°-angle off-set : position them upward, inward or downward for optimized viewing conditions