Specifications: CORSAIR TM30 thermal paste helps you push your PC to its limit, with a low-viscosity premium zinc oxide thermal material that’s easy to apply. TM30’s ultra-low thermal impedance ensures high-efficiency heat transfer between your hardware and cooler, lowering temperatures and allowing for higher clock speeds.
Net Weight: 3g
Thermal Conductivity: 3.8 W/mK
Thermal Impedance: 0.01°C -in2/W
Viscosity: 2300K cPs
Specific Gravity: 2.5g/cm3
Specifications: Average Particle Size:
< 0.49 micron < 0.000020 inch
Extended Temperature Limits:
Peak: -50 Celsius Degree to >180 Celsius Degree
Long-Term: -50 Celsius Degree to 130 Celsius Degree
Performance:
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area:
A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.
Specifications: Thermal Conductivity (W/mk): 8.5
Viscosity (poise): 870
Density (g/cm3): 2.5
Net Weight: 4g
The ARCTIC MX-4 is a premium-grade thermal paste with exceptional performance and ease of application. It is an electrically non-conductive paste that is applied between CPU / GPU and designated coolers to transfer the dissipated heat from the components to the heat sink. Since the ARCTIC MX-4 is a metal-free compound, it eliminates the risks of causing short circuit and in turn adding more protection to your computer. The new formula in the ARCTIC MX-4 features optimal thermal conductivity and low thermal resistance. These characteristics effectively dissipate the emitted heat from the core components. The consistency of the ARCTIC MX-4 is designed for simple application. Its text...
Specifications: Applications: CPU / GPU Thermal Thermal Conductivity: 73 Wm / K Specific gravity: 6.24g/cm³ Viscosity: 00021 pas Operating temperature: 10 °C /140°C Content: 5g
Specifications: Average Particle Size:
<0.49 micron <0.000020 inch
Extended Temperature Limits:
Peak: -50 Degrees C to >180 Degrees C
Long-Term: -50 Degrees C to 130 Degrees C
Performance:
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area:
A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.
Specifications: Kryonaut uses a special structure, which halts the drying out process at temperatures of up to 80° Celsius. This structure is also responsible for the nano-aluminum- and zinc-oxide-parts included in the grease to compound optimally, to compensate for unevenness of the component (i.e. the CPU) or the heat sink, thus guaranteeing remarkable heat transfer.
Long Term Operating Temperature: -200 °C / +350 °C
Specifications: The Hydronaut thermal grease delivers optimal heat transfer capabilities for larger-scale cooling solutions like water cooling systems.
Hydronaut thermal grease consists of a silicon-free structure. The makes it very light and highly flexible and easy to apply.
Hydronaut achieves best results if used on medium- to large-scale cooling solutions. This product is ROHS-compliant for demanding users.