"Liquid cooling"

Limited time offer, ends 01/30

• Accessory Type: Cooler
• Model #: FB0C2NGB77P

• Type: Case Fan
• RPM: max. 2000 RPM
• Noise Level: max. 31.5 dB(A)
• Power Connector: 4 Pin
• Model #: NF-A14 iPPC-24V-2000 SP IP67 PWM

Limited time offer, ends 01/31

• Type: Fan splitter cable
• Length: 6 inches
• Connector Number: 3
• Model #: 121014

Limited time offer, ends 01/31

• Brand: EN-Labs
• Model #: 36WPCICON5D

Limited time offer, ends 01/30

• Accessory Type: Cooler
• Model #: FB0CH3B2QPQ

• Type: AIO
• Block Compatibility: Intel® LGA 1700, 1200, 115X and AMD AM5, AM4
• Block Compatibility - AMD: AMD AM5, AM4
• Block Compatibility - Intel: Intel® LGA 1700, 1200, 115X
• Model #: 90RC0120-M0AAY0

(5)

• Type: Case Fan
• RPM: 650-1500 RPM
• Air Flow: 55 CFM
• Noise Level: 6-30 dBA
• Model #: MFL-B4DW-15NPA-R1

Limited time offer, ends 01/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

• Brand: Phanteks
• Type: Radiator
• Radiator Size: 470x140x30 mm
• Radiator Material: Fins: T2 Copper Water Chamber: H62 Brass Thread Insert: H59 Brass Side Pane: 430 Stainless Fittings: Brass Fitting Insert: ABS
• Model #: PH-GEF-RAD423_BK

• Type: Water Cooling
• Model #: B08L4YQJG3

• Model #: JONSPLUS i100 Pro

• Model #: 966505454666

• Brand: Montech
• Type: AIO
• Block Compatibility: Intel :1700/1851 AMD: AM4/AM5
• Pump Speed: 3100RPM +-10%
• Model #: LightFlow ARGB 360 Black

• CPU Name: Intel Core i5-14400F
• GPU/VGA Type: GeForce RTX 4070 SUPER
• Memory Capacity: 32GB DDR5
• SSD: 1TB
• Model #: B23-I5 14400F-4070S 12G-32G1TB

Limited time offer, ends 01/31

• Model #: 11-001-061

Limited time offer, ends 01/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-262

Limited time offer, ends 01/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

(5)

• GPU/VGA Type: GeForce RTX 3070
• CPU Name: AMD Ryzen 7 5800X
• Memory Capacity: 32GB DDR4
• SSD: 2TB PCIe
• Model #: Cascabel

• Fan Size: No Fans
• Color: Silver
• Model #: 001-Silver-ARGB

Limited time offer, ends 01/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

• Type: Liquid Cooling System
• Radiator Size: 276 mm
• Radiator Material: Aluminum
• Fan Size: 2 Fan Slots (120 mm)
• Model #: CCPTKM25-240ARGB-BK

Limited time offer, ends 01/31

• Model #: 11-001-236

• Fan Size: 120mm
• Series: N/A
• Type: CPU Water Cooling
• RPM: 800-2150 RPM±10%
• Model #: GL360-RGB Black

Limited time offer, ends 01/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

(1)

• Type: Fittings
• Model #: CL-W053-CU00BL-A

(1)

• Block Compatibility: AMD Socket AM3 / AMD Socket AM3+ / AMD Socket AM4 / AMD Socket FM2 / AMD Socket FM2+ / AMD Socket sTRX4 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700 / Intel LGA 2011
• Block Compatibility - AMD: AM4 /AM3+
• Block Compatibility - Intel: 2011 /1156 /1155 /1151 /1150
• Fan Size: 3 Fan Slots (120 mm)
• Model #: MPG CORELIQUID K360 V2

• Model #: DZ-M.2 Cooler-001

Limited time offer, ends 01/31

• Model #: 11-001-195

• Brand: Montech
• Type: AIO
• Block Compatibility: Intel :1700/1851 AMD: AM4/AM5
• Pump Speed: 3100RPM +-10%
• Model #: LightFlow ARGB 240 White

Limited time offer, ends 01/31

• Brand: EN-Labs
• Compatibility: 5.25" Drive Bay
• Types: Touch Screen Fan Controller
• Material: Plastic
• Model #: 525FPFANCON5D

• Brand: SILVERSTONE
• Part Number: XE360PDD
• Model #: XE360PDD

• Type: Liquid Cooling System
• Block Compatibility - AMD: AM4 / AM3 (+) / FM2(+) / FM2
• Block Compatibility - Intel: LGA 2066 / 2011 V3 / 2011 / 115X
• Block Material: Aluminum
• Model #: darkFlash-DX240-Blac

• Block Compatibility: Installation Compatibility: 120 and 140mm fan / radiator, Phanteks pump bracket Pump compatibility: DDC / D5 (Stand-alone)
• Type: Reservoir
• LED Color: RGB
• Reservoir Dim.: 6.30" x 3.20" x 1.50"
• Model #: PH-R160_BK01

Limited time offer, ends 01/31

• Model #: C22J-H-121202

Limited time offer, ends 01/31

• Model #: 11-001-292

• Brand: COOLER MASTER
• Fan Size: 120mm
• LED: ARGB
• Type: Case Fan
• Model #: MFW-B2DW-17NPA-R1