Team T-Force Vulcan 16GB (1x16GB) 288-Pin PC RAM DDR5 6000 (PC5 48000) Desktop Memory Model FLRD516G6000HC3001 Red CL30
- DDR5 6000 (PC5 48000)
- Timing 30-36-36-76
- CAS Latency CL30
- Voltage 1.35V
- Intel XMP 3.0 / AMD EXPO
- Red heatsink, 32.7mm low profile
+
+
Reviews
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Limited Warranty period (parts): Lifetime
- Limited Warranty period (labor): Lifetime
- Read full details
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Newegg.ca's Standard Return Policy.
- Read full return policy for details.
Manufacturer Contact Info
- Manufacturer Product Page
- Manufacturer Website
- Support Phone: 1-833-574-4629
- Support Website
- View other products from Team Group
LOADING...
Team T-Force Vulcan is a 16GB DDR5-6000 desktop memory module with CL30 timings, suited to PC builders who want one fast 1x16GB stick and plan to configure Intel XMP 3.0 or AMD EXPO on a compatible system.
Recommended For
- Budget-conscious DDR5 desktop builders who want a 16GB starting point now and are willing to move to a matched two-module setup later; check platform compatibility before mixing or adding memory.
- PC gamers using a dedicated graphics card who can accept some performance trade-off from one memory module—particularly those with an X3D processor, which showed a smaller single-DIMM impact in Tom’s Hardware’s testing.
- Desktop builders with a compatible DDR5 motherboard and CPU who want a 6000 MT/s, CL30 module with Intel XMP 3.0 and AMD EXPO profiles, and are prepared to check system support and enable the profile in BIOS.
Real-World Use Scenarios
- For everyday browsing, documents, video playback, and light multitasking, this 16GB module can serve as the memory in a basic desktop build; running many demanding apps at once may make the 16GB capacity feel limiting.
- For gaming on a budget, one stick can get a PC running, but game performance may vary: testing of comparable DDR5-6000 memory found measurable losses in some games and smaller differences in others versus two sticks. It is a practical compromise, not the best choice for consistently strong frame rates.
- When building a PC in stages, this single 16GB module can provide a starting point, with a compatible second module as a possible later upgrade to increase capacity and enable two-module operation. Check motherboard compatibility, and note that separately purchased modules are not guaranteed to work together at their rated settings.
- For a build with a large air cooler, the module’s 32.7mm height may help with memory clearance, but check the cooler’s RAM-clearance specifications before installation.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | Desktop memory upgrades for systems that support DDR5 |
Reference Q&A
Q: Should I buy this 16GB stick or a 32GB (2x16GB) DDR5-6000 CL30 kit?
A: Choose this stick if the lower-cost starting point matters and you plan to expand later. Choose the 32GB kit if you want more memory and two modules installed from the start, especially for gaming or memory-heavy work. A TechSpot test using DDR5-6000 CL30 found that the single-module performance difference varied by game, so the result depends on the workload and system.
Q: For a 16GB DDR5 build, should I get this single stick or a 2x8GB kit?
A: Choose this 1x16GB stick if you expect to add another compatible 16GB module and move to 32GB. Choose a matched 2x8GB kit if you plan to keep the system at 16GB and prefer two modules installed now. Single-module gaming performance can vary by game and CPU; published DDR5 testing shows that two-module configurations can perform better in some workloads, but it does not establish one fixed advantage for every 2x8GB kit.
Q: Can I use this DDR5 stick as an upgrade for a PC that currently has DDR4 RAM?
A: No. This is a DDR5 desktop memory module, so it cannot replace or mix with DDR4 memory in a DDR4 motherboard. Use it only with a motherboard that supports DDR5; check the motherboard and processor specifications before buying.
Q: Will this memory work with my desktop motherboard and processor?
A: It is a 288-pin DDR5 desktop module, not laptop SO-DIMM memory. Check that your motherboard and processor support DDR5 and verify the module against the motherboard’s memory compatibility list before buying; support for this module type does not guarantee every system will run it at 6000 MT/s.
Q: Will it run at 6000 MT/s automatically?
A: Not necessarily. The module is rated for DDR5-6000 and supports Intel XMP 3.0 and AMD EXPO, but reaching that rated speed depends on the motherboard and processor. Check platform support and whether a profile must be enabled in BIOS.
Q: Is one 16GB stick enough, and can I add another later?
A: This product is one 16GB module. It can suit a compatible system that needs a single DDR5 stick, but whether 16GB is enough depends on your applications and workload. A second module may increase capacity and enable dual-channel operation, but check motherboard guidance and use a compatible matched module; mixing memory can affect stability and supported speeds.
Q: Will this fit if my PC has a large CPU cooler?
A: The module is 32.7 mm tall and has a red heatsink. Compare that height with the clearance around your CPU cooler and the motherboard’s memory slots before installing; case and cooler layouts vary.
Q: Is one 16GB stick a reasonable starting point if I may add more RAM later?
A: It can be a practical upgrade path if you need to start with 16GB, but this product is a single module, not a matched pair. A Reddit discussion about a single-stick T-Force Vulcan upgrade focused on finding an identical module; adding a second stick may enable dual-channel operation, but confirm compatibility with your motherboard and CPU.
Q: Is this 6000 CL30 memory a sensible choice for an AMD AM5 build?
A: The module lists both AMD EXPO and Intel XMP 3.0, and its DDR5-6000 CL30 specifications match the kind of memory users discuss for AM5 builds. Compatibility and stability still depend on the specific CPU and motherboard; check their memory support, and treat a missing QVL listing as unverified rather than as a guarantee of incompatibility.
Q: Should I choose a single 16GB module or a 2×16GB kit?
A: Choose this 1×16GB module if you specifically need one stick or plan to expand later. If you need 32GB now, a 2×16GB kit provides that capacity as a matched pair; Reddit build discussions also raise the trade-off between starting with one stick and using two. The provided product data does not establish the performance difference for your particular system.