M.2 Key A+E to Dual USB 2.0 Port Expansion Card 480Mbps MCA527 Compatible with WinXP/2003/VISTA/2008/7/8/10/1132/64BIT
Limited time offer, ends 11/15 By StarVelocity Technology
- Product Interface: 5PIN 1.0mm, 2x USB cable. Product rate: 480Mbps. Product interface: M.2 (A KEY) 2230.; Support System: Compatible with WinXP/2003/VISTA/2008/7/8/10/1132/64BIT/Linux; Purpose: This product is to lead the USB signal out on the USB HUB chip and boost the 3.3V to 5V/1A to supply the USB device.; Because the USB signal is output from the computer, some computer screen shield this signal or no signal output at all, which will cause this card can not be used, not a card problem. If the inner bridge USB is damaged, also can not use this card.; Only suitable for M.2 with Bluetooth-compatible network card (KEY-A) interface. CNIV interface can not be used, does not support M.2 hard drive interface!
+
+
Overview
Specs
Reviews
M. 2 KEY A+E to Dual USB 2.0 Port Expansion Card 480Mbps MCA527 Compatible with WinXP/ 2003/ VISTA/ 2008/ 7/8/10/ 1132/ 64BIT/ Linux
Product Detail:
Model: M. 2(KEYA-E) to dual-port USB 2.0
Product Interface: 5PIN 1.0 mm, 2x USB cable
Product interface: M. 2 (A KEY) 2230
Product rate: 480Mbps
Product Control: FE 1.1S
Support System: Compatible with WinXP/2003/VISTA/2008/7/8/10/1132/64BIT/Linux Attention M. 2 standard network card contains USB 2.0 signal and 3.3V power supply. This product is to lead the USB signal out on the USB HUB chip and boost the 3.3V to 5V/1A to supply the USB device. Look at the working principle above, because the USB signal is output from the computer, some computer screen shield this signal or no signal output at all, will cause this card can not be used, not a card problem. If the inner bridge USB is damaged, also can not use this card.
Note: Only suitable for M. 2 with Bluetooth-compatible network card (KEY-A) interface. CNIV interface can not be used, does not support M. 2 hard drive interface!
Product Detail:
Model: M. 2(KEYA-E) to dual-port USB 2.0
Product Interface: 5PIN 1.0 mm, 2x USB cable
Product interface: M. 2 (A KEY) 2230
Product rate: 480Mbps
Product Control: FE 1.1S
Support System: Compatible with WinXP/2003/VISTA/2008/7/8/10/1132/64BIT/Linux Attention M. 2 standard network card contains USB 2.0 signal and 3.3V power supply. This product is to lead the USB signal out on the USB HUB chip and boost the 3.3V to 5V/1A to supply the USB device. Look at the working principle above, because the USB signal is output from the computer, some computer screen shield this signal or no signal output at all, will cause this card can not be used, not a card problem. If the inner bridge USB is damaged, also can not use this card.
Note: Only suitable for M. 2 with Bluetooth-compatible network card (KEY-A) interface. CNIV interface can not be used, does not support M. 2 hard drive interface!
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 90 days
- This item is covered by StarVelocity Technology Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...