Your Browsing History
We‘re shipping as usual! The Canada Post strike only affects certain remote deliveries and PO Boxes. Details
Holiday Shipping Details & Extended Holiday Returns
2 Channel Support Modbus TCP Protocol Dc 5V Relay Module, 3.2 X 2 X 1.2Inch Network Relay, TCP Client and Udp Mode for Smart Home MultiClient Use
Limited time offer, ends 12/16 By ElectroWorks JV
- HIGH-PERFORMANCE MATERIAL: IP network relay module adopts 32-bit microcontroller with high-performance Cortex-M3 core, network chip is W5500, with hardware protocol
- CUSTOMIZABLE: You can customize the device name, support Chinese definitions, and there is no need to record cumbersome IP when there are many devices. Custom heartbeat packet time, reliable network recovery
- C++ SOURCE CODE: Provide host computer C++ source code, reliable network connection, router disconnection restart, reliable network connection recovery, cross-gateway remote control
- PRODUCT FEATURES: Support working in TCP server, TCP client and UDP mode. Work in TCP server mode and support 4 client connections. Support MODBUS TCP protocol, support configuration king. Support online update program, very convenient for customers to customize the program
- WIDE RANGE OF APPLICATIONS: 1. It can be used for smart home control, controlling router disconnection and restarting, etc. 2. It can remotely contr
+
+
Overview
Specs
Reviews
Specification:
Item Type: IP Network Relay Module
Supply Voltage: 5V
Current: Not less than 1A
Two-channel relays can reach a single function rate of 2KW, AC load rated voltage 250V, current 10A, DC load rated voltage 30V, current 5A
Size: Approx. 81 x 50 x 31mm / 3.2 x 2 x 1.2 in
Operating Temperature: -40 to 80.
Applications:
1. Can be used for power failure detection in the computer room, can be connected to human body infrared sensors, can be connected to key switches, can be connected to smoke alarm output.
2. Can be connected to smoke alarm output, can be connected to human body infrared output
3. Can be connected to key switch, can be connected to any passive switching input, can also be connected to active switching input (connected to 5V active switching).
4. Can be controlled by external network, and can be controlled remotely by mobile phone.
Control Instruction:
Send: on1 turns on the first relay
Send: off1 turns off the first relay; the second control method is the same.
Send: read1 means to read the state of the first relay. If it returns on1, it means that the first relay is on, and off1 means that the first relay is off.
Delay control, such as
Send: on 1: 02 Means That The Relay Will Open After 2 Seconds, and
send on: 12 means that the relay will open after 12 seconds. The maximum delay is 99 seconds.
For MODBUS TCP
1.01 opcode
This operation code is to read the state of the relay. The relay address is 0010 on the first channel and 0011 on the second channel.
2.05 opcode
This operation code is to control a single relay. The relay address is 0010 on the first channel and 0011 on the second channel.
3. 0F opcode
This Operation Code Is To Control Two Relays.
The Relay Addresses are: No. 0010, No. 0011.
Package List:
1 x IP Network Relay Module (with case)
Item Type: IP Network Relay Module
Supply Voltage: 5V
Current: Not less than 1A
Two-channel relays can reach a single function rate of 2KW, AC load rated voltage 250V, current 10A, DC load rated voltage 30V, current 5A
Size: Approx. 81 x 50 x 31mm / 3.2 x 2 x 1.2 in
Operating Temperature: -40 to 80.
Applications:
1. Can be used for power failure detection in the computer room, can be connected to human body infrared sensors, can be connected to key switches, can be connected to smoke alarm output.
2. Can be connected to smoke alarm output, can be connected to human body infrared output
3. Can be connected to key switch, can be connected to any passive switching input, can also be connected to active switching input (connected to 5V active switching).
4. Can be controlled by external network, and can be controlled remotely by mobile phone.
Control Instruction:
Send: on1 turns on the first relay
Send: off1 turns off the first relay; the second control method is the same.
Send: read1 means to read the state of the first relay. If it returns on1, it means that the first relay is on, and off1 means that the first relay is off.
Delay control, such as
Send: on 1: 02 Means That The Relay Will Open After 2 Seconds, and
send on: 12 means that the relay will open after 12 seconds. The maximum delay is 99 seconds.
For MODBUS TCP
1.01 opcode
This operation code is to read the state of the relay. The relay address is 0010 on the first channel and 0011 on the second channel.
2.05 opcode
This operation code is to control a single relay. The relay address is 0010 on the first channel and 0011 on the second channel.
3. 0F opcode
This Operation Code Is To Control Two Relays.
The Relay Addresses are: No. 0010, No. 0011.
Package List:
1 x IP Network Relay Module (with case)
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 15 days
- Return for replacement within: 30 days
- This item is covered by ElectroWorks JV Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...