Your Browsing History
Meet Your Seller
PCIe 1 to 4 Riser Card, Pcie Splitter 1 to 4 PCI Riser Card, 4 Risers into 1 PCI Card, PCIe Risers 1X to External 4 PCI-e USB 3.0 Adapter Multiplier for Bitcoin Miner Device
- NOTE: The motherboard must be powered off before installation. GREAT EXTENDABILITY-Plugs directly to the board without any extender cable, can be fixed to the case. (compatible with X4, X8, X16 slot)
- HIGH EFFICIENCY - This pci-express card has reduced the number of adapter and transfer line, one line directly to the interface, effectively reduce the interface interference and wire loss, to ensure data reliability, so as to improve work efficiency!
- HIGH STABILITY - The main control panel of this PCI expansion card uses PCI-E interface direct power supply mode, and no external power line is needed, so that the main board power is free from external interference, and the stability is higher!
- COMPATIBILITY - PCI-E 1 to 4 Riser Card, Supported OS: DOS, Linux, Windows XP/7/8/10.
- PORT QUANTITY - 4 X PCI-E USB, Only one cable to the slot, easy and convenient to settle and install.With IC heat radiator.
+
+
Overview
Specs
Reviews
Specification:
Name: PCI-E one turn four expansion card
Bus interface: PCI-E X1 (compatible with X4, X8, X16 slot)
Interface type: PCIE to 4-port USB 3.0
Product size: 120mm (bracket length) *67mm*57mm
Support system: DOS, Linux, Windows XP/7/8/10
Notice:
Recently, new motherboards have appeared on the market.
The factory default setting of the LPE-4X is GEN3.
As a result, the computer cannot recognize the graphics card or the exclamation mark appears.
You need to set the BIOS to set the PCI-E16x speed to GEN2 or GEN1, recommended to set to GEN2.
Package listing:
1* PCI-E 1 to 4 Riser Card
Features:
Name: PCI-E one turn four expansion card
Bus interface: PCI-E X1 (compatible with X4, X8, X16 slot)
Interface type: PCIE to 4-port USB 3.0
Product size: 120mm (bracket length) *67mm*57mm
Support system: DOS, Linux, Windows XP/7/8/10
Package included: 1 X PCI-E to 4 USB 3.0 Converter Card
Notice:
Recently, new motherboards have appeared on the market.
The factory default setting of the LPE-4X is GEN3.
As a result, the computer cannot recognize the graphics card or the exclamation mark appears.
You need to set the BIOS to set the PCI-E16x speed to GEN2 or GEN1, recommended to set to GEN2.
Package listing:
1* PCI-E 1 to 4 Riser Card
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- This item is covered by Astral Tech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...