U608ZZ 608 Nylon U Groove Bearings 8x30x10mm Double Metal Shielded (GCr15) Chrome Steel Ball Bearings 5pcs

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

• Single-row, pre-lubricated, normal accuracy.
• Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
• With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
• Carbon Steel made with heat treating, provides high and uniform hardness, good wear resistance
• Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced NBR (oil- and liquid-resistant). Lower limit speed than Shield Bearings.KEY_TAB

Specification:

Model: U608ZZ

Shielded Type: Double Shielded

Inner Race/Outer Race Material: Chrome Steel / Nylon

Cage Material: Stamping Steel

Inner Diameter (d): 8mm

Outer Diameter (D): 30mm

Thickness (B): 10mm

Groove width: 6mmKEY_TAB

Groove depth: 2.5mm

Accuracy Class: P0 (ABEC1)

Noise Level: Z2

Number of Pack: 5Pcs