Your Browsing History
Meet Your Seller
Solar Cable Entry Gland Box, IP67 Waterproof Dual Port Roof Cable Pass Through for RV Boat ABS Housing with 10AWG Tinned Copper 2m Wire Prewired 1 Pack
- [IP67 WATERPROOF SEAL] IP67 rated gland box is dust tight and resists temporary immersion up to 1m. Silicone seals and ABS housing help protect roof cable entry points on RV and boat surfaces in rain and spray.
- [DUAL PORT 10AWG DESIGN] Double cable entry routes positive and negative solar wires through one compact housing. It fits standard 10AWG cables and reduces extra roof openings on 100W to 200W panel setups.
- [PREWIRED TINNED COPPER] Includes 2m prewired 10AWG tinned copper cable to support efficient conductivity and lower power loss. Corrosion resistant wire performs reliably in marine and coastal environments.
- [SCREW OR ADHESIVE MOUNT] Designed for flexible installation with predrilled holes and a glue groove. Suitable for rigid roofs or EPDM and TPO RV roofs when paired with sealant for a secure weatherproof fit.
- [UV RESISTANT ABS BODY] Durable ABS shell with anti UV protection withstands outdoor exposure and temperatures from minus 40 degrees C to 85 degrees C. Built for R
+
+
Overview
Specs
Reviews
Spec:
Item Type: Solar Double Cable Entry Gland Box
Material: ABS, silicone, tinned copper
Cord Length: Approx. 2m / 6.56ft
Wire Specification: 10AWG
Package List:
1 x Solar Double Cable Entry Gland Box
How To Use:
Step 1: One end is equipped with a solar connector, which can be directly connected to the solar panel.
Step 2: Thread the cable through the gland and tighten the cover. Thread the connecting wire through the reserved hole on the roof of the RV and connect to the other end of the connector.
Step 3: Depending on the location and sealing requirements, you can use glue or decorative sealant to seal the gaps.
Note:
Please note that sealant must be applied whether using glue or screws. Seal around the fixed position, double protection, leakproof and waterproof.
Item Type: Solar Double Cable Entry Gland Box
Material: ABS, silicone, tinned copper
Cord Length: Approx. 2m / 6.56ft
Wire Specification: 10AWG
Package List:
1 x Solar Double Cable Entry Gland Box
How To Use:
Step 1: One end is equipped with a solar connector, which can be directly connected to the solar panel.
Step 2: Thread the cable through the gland and tighten the cover. Thread the connecting wire through the reserved hole on the roof of the RV and connect to the other end of the connector.
Step 3: Depending on the location and sealing requirements, you can use glue or decorative sealant to seal the gaps.
Note:
Please note that sealant must be applied whether using glue or screws. Seal around the fixed position, double protection, leakproof and waterproof.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 90 days
- This item is covered by LionTech Direct Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...