3 Set Rechargeable DLP Link 3D Glasses Active Shutter Eyewear For Xgimi Z3/Z4/Z6/H1/H2 Nuts

Display Number:None
Certification:NONE
Sensor Type:as described
Controllers:Yes
All-in-one Virtual Reality Glasses:No
3D Glasses Type:Virtual Reality
Compatible Device:No
Origin:CN(Origin)
Type:Binocular
Viewing Experience:Non-Immersive

3 Set Rechargeable DLP Link 3D Glasses Active Shutter Eyewear For Xgimi Z3/Z4/Z6/H1/H2 Nuts
3 set 3D Glasses Active Shutter Eyewear
Works with all DLP Link projectors! Compatible with Optoma/BenQ/Sharp/Acer/LG/Samsung/Mitsubishi and other series DLP projectors.Can't compatible with Sony Epson and other LCD projectors, not used for Televisions
Adopts the est active shutter technology, high definition and no flickering or crosstalk, super fast 144Hz refresh rate
Built-in rechargeable , continuous working 45 hours after fully charged with USB, standby time 180 days.Auto power off function (within 1 minute of turning off your projector), save energy and stable;Atmospheric Pressure:86kPa-106kPa
1.DLP link technology working mode,2.Micro-USB rechargeable 3.7V Lithium ,standby time 180 days,
3.Continuous working 45 hours,4.Super fast 144Hz refresh rate.
5.Low-power design,can charge by USB.6.Compatible with Optoma/BenQ/Sharp/Acer/Samsung/Mitsubishi series DLP projector
7.Excellent lenses offer bright and sharp 3D experience;8.Adopt the est active shutter technology, high definition and no flickering or crosstalk,9.Auto power off function, save energy and stable.
Ratio:1000:1+/-200
Frequency:96/100/120/144Hz
Working Current:Less than 1.2mA
Work Hours:45+/-5hr
Lifespan:0°C-45°C
Storage Temperature:-10°C-60°C
Power Supply:3.7V 80mAH
Transmission:38%+/-2
Response Time:2ms+/-0.5ms
View Angle:150°(L/R 75°)
SYNC Operation:White light DLP.Link
Work Humidity:20%-80%RH
colour:blue
Material:plastic
size:163x42x170mm
Package Contents:
3 x Shutter Eyewear
3 x USB Charger Cable
Warm tip:
If you cannot make sure if our glasses can work with your projector, there are 2 ways to confirm it
1:The 3D signal receiving window can receive the DLP-Link signal. As soon as you use 96-144Hz DLP-Link 3D projector and connect thru 3D image source,our glasses can work perfect with your projector.
2:Or if your projector has the logo of "DLP 3D Ready" below, our glasses also can work
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.