Mini-Pcie Wireless Network Card to Pcie 4.0 x1/ x4/ x16 Riser Extension Cable PCIe 4.0 mPCIe M.2 NVME SSD Motherboard Riser Ribbon Extender (25cm,Pcie4.0 4X R62JF)

Wire advantage. Using german patented imported wire, using taiwan imported connector, supporting pcie 3.0 full-speed stable transfer.From 3 cm to 1 meter can be customized.The cable impedance is low, and the cable length within 60 cm supports pcie3.0 full speed.
Differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there will be no caf micro short circuit phenomenon, and the product is durable.
The PCB is made of precision, the thickness of the copper material is thickened to 1oz, the gold plated content is sufficient, and the gold plated foot has good electrical conductivity, which can reduce the blue screen of crash caused by the increase of oxidation and rust resistance. Stable at full speed, no speed reduction required, and no compatibility issues.
The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm at the metal welding points, and lock the screws and hexagonal nuts to fasten it. The product is strong and reliable, resistant to pulling, anti-interference, and will not break the wire. The nail drop problem. The wire can be bent or folded without affecting the use.
The PCB is designed with short and fattening, which will not get stuck on the graphics card. The fattening and long design makes the board easier to install and reduces the chance of damage.