DTF Ink 1000ml Combo Pack Compatible for printheads Installed DTF Printers L1800 R1390 ET-4800 8550 XP15000 I3200 4720 XP600 TX800 ET2800,(2*White+ 1set Black Cyan Magenta Yellow)

Common problems with hot stamping paint ink 1. Suitable materials for hot stamping Materials such as cotton, polyester cotton, leather, etc. that can be combined with hot melt adhesive. 2. Suggested usage environment for ink The temperature is 15-30 and the humidity is 50-80%. For areas without heating, it is best to warm the ink back to the recommended printing temperature and maintain appropriate humidity according to the environment. 3. Suggested storage environment for ink Ink must be stored in a clean, cool, and dry place with a temperature of 5-30 and a relative humidity of 40-80%. 4. Suggested storage environment for PET film It must be stored in a clean, cool, and dry place, with a temperature of 5-30 and a relative humidity of 40-80%. The product has a shelf life of 12 months when unopened and stored in good condition. After opening, please use the PET film as soon as possible. If it is not used up, please seal and store it to prevent moisture. 5. Suggestions for setting the powder shaker The heating temperature of the front desk version is 40-90 , and the temperature in the drying tunnel is set at 130-145 . The baking time varies depending on the printing speed and powder melting effect (3-5 minutes) 6. Transfer conditions Suggested temperature: 150-170 , time: 8-15 seconds/time In the actual use process, the specific transfer time can be adjusted according to the customer's use of changing environments, equipment, substrate fabrics, and related consumables. Can I tear it off and reset it? No, hot stamping is high-temperature transfer printed on clothing and cannot be reused.