182G18 - TXFR 36VCT@6.25A I/P 225V 36VCT@6.25A(SR) 18V@12.5A(PR)

Features

• Low profile lightweight cool running due to high efficiency toroidal design
• Dual 117/234 VAC primary 50/60 Hz. operation
• Units are designed to have all windings engaged.
• Center single hole mounting units over 225VA include a potted center (see photos
• below) for extra mounting strength.
• Supplied with two rubber insulating pads one metal centering washer and all mounting
• hardware (160VA and under)
• Supplied with one bottom rubber insulating pad and mounting hardware (225VA and
• larger)
• Center bolt size varies with VA see tables below.
• Minimum 8 long flexible leads
• HiPot test of 4 000V RMS between primary & secondary
• CSA certified to C22.2 #66 CSA file #209651
• UL recognized to UL506 UL file #E207860
• CE certified to IEC950

Note about Inrush Current: Due to the superior magnetic properties of Toroidal transformers they will be susceptible to high magnetizing current when initially energized only limited by the low DC resistance of the primary winding. Depending on where you are in the AC cycle when the transformer is energized dictates the chances of overloading the supply circuit. This is why the transformer may sometimes energize without a problem and other times it will blow the fuse or trip the circuit breaker. The duration of this overload is rarely longer than a half of a cycle. Therefore you should consider using a slowblow fuse time delayed circuit breaker or other form of soft start circuitry for the supply line when using these high efficient Toroidal transformers.