PrimoChill Water Cooling Cleaning Prep Kit - Existing System

Rebuilding a water cooling system can be a tedious process. All the film left from your previous coolant built up inside. We created a perfect cleaning kit for rebuilding existing systems.
Use the rad clean to make sure any bits and residue is flushed out of your radiator while essentially scrubbing the inside of any chemicals or film.
Next the System Reboot is used to clean the entire loop of any chemical or dye remnants left from your previous coolant. The Reboot will pull any dye off internal surfaces ensuring none bleeds into your next coolant choice.
Finally use the unique PrimoPrep to get your loop prepped for possible PH imbalances caused mostly by high levels of copper mostly from large capacity radiators. With this treatment it also prepares the system for use of coolants in a mix metal closed loop environment leaving the guesswork a thing of the past.
Specifications Rad Clean
Included: 2oz Rad Clean, 2 plastic fittings w/ orings, 1 threaded funnel

Dosage: Mix 1/2 bottle with 32oz of DI or distilled water
PrimoPrepDosage: Mix with 32oz of DI or distilled water

System Reboot

Dosage: Mix with 1 Gallon of DI or distilled water

Shelf Life: 2 Years, Unopened

Compatibility System Reboot / PrimoPrepSystem Reboot and PrimoPrep are compatible with rigid and flexible tubing of all sizes. It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe! Rad CleanRad Clean is compatible with the internal metals found in radiators only! Using Rad Clean on nickel items is NOT compatible! WarningsImportant to use plastic fittings when cleaning radiators while using Rad Clean!Do not mix preps with any pre-mixed coolants as it will over saturate the inhibitors.Not responsible for any hardware damage...