Sleeved Jacket 30cm 1 to 5 4-pins Molex TX4 PWM CPU Cooler / Case / Chasis Cooling Fan Power Cable Hub Splitter Adapter

En-Labs fan hub, a central distribution point in your computer! Especially in systems with many fans or have large radiators where multiple fans can be mounted, it is handy to have a central power point to connect the fans.

Features:

It is designed for enthusiasts with need for controlling numerous system fans

Capable of expanding one motherboard PWM fan header to support up to five fans. 

Support PWM Funciton, Speed control, satisfy your control needs.

Compatible with 3-pin / 4-pin Fans  (Due 3pins no PWM controller, 3pin fans would run in full speed.)

Support Cable Management

Comes with  Self-Stick  for easy installation and options to hide the PCB itself.

Since only one RPM signal can be read by one motherboard connector, only ' CPU Fan' channel of the PWM splitter carries an RPM signal; thus the motherboard will only read the RPM signal of the PWM device that is connected to channel 1 of the splitter.

Specifications

Type: 4 ports /5 Ports / fan hub

Cable Length : 

30cm for 4 ports  and 5 ports  fan hubs

Color : sleeved cable

Connector A: 1 - TX4 4-pin Female

Connector B: 1- TX4 4-pin Male for CPU fan (including Detect tach pin)

4/5 - TX4 4-pin Male  for case fan

Type: 10 ports PWM  fan hub

Cable Length

60CM   sleeved TX4 4pin female to female for hub to motherboard connecting

Power by :

CPU fan is powered by motherboard 4pin holder, 

Fan1~Fan 9  are powered by the Molex LP4 4pin connector

Note:

Only the fan on 'CPU Fan' channel is used for monitoring. 

This is only a fan hub,NOT fan speed controller,

Only 4pin PWM fans speed can be adjusted by fan controller software,