USB C to DC Adapter,Barrel PD Trigger Cable(3.3ft) with 10 Connector Tips,USB to DC Power Cable can Switch Voltage by Pressing The Key,Support LED Display Voltage

FARSENSE has always focused on innovative development and design of power modules,committed to creating more suitable power products for users

Wide range of applications and strong reusability

• Wide application: For USB-HUB/Mini fan/Notebook/LED Pixel Light/Camera/Tablet/VoIP Phone Router/MP3/Webcam Router/Toy/Bluetooth Speaker/Webcam Router/Recorder/Scanner/DVR/Hard Disk Box/Serato DJ Controller/Home Phone System and more devices;

• Does not support bi-directional charging,USB input,DC output;

• Display: LED display output voltage.

Trigger 5 kinds of voltage output,which is convenient for multiplexing of multiple devices

• Support protocols: PD/QC/AFC;

• Power: Maximum 20V/3.25A 65W output,compatible with 65W/45W/30W/18W and other power output (the output power of the charger or power bank needs to be greater than the load device);

• Long press the button: Press and hold for more than 3 seconds each time,the voltage will cycle between 5V/9V/12V/15V/20V,When negotiation with the PD adapter fails,an error code will be displayed: 5V corresponds to AF,9V corresponds to BF,12V corresponds to CF,15V corresponds to DF,and 20V corresponds to EF.The new version has upgraded new functions,switching back and forth between voltage and error codes for easy viewing of the current output status;

• Short press the button: Short press the button to switch the voltage display (on or off),turn off the voltage display,which can reduce light pollution or reduce eye damage;

• Double press button: Quick double press button can switch between memory mode and non memory mode.When displayed as OP symbol,it indicates that memory mode is open.When displayed as CL symbol,it indicates that memory mode is close.In memory mode,each voltage switch will be saved.In non memory mode,voltage switch will not be saved.When powered on again,it defaults to 5V,suggest using non memory mode,do not save the last set voltage output to avoid high-voltage damage to low-voltage load equipment;

• Operating instructions: There are operating instructions on the back of the product,and no paper instructions are provided to reduce resource waste and protect the environment.

Lightweight appearance,it can be a perfect replacement for heavy chargers/power bricks

You can put it in a backpack,or even put it in a shirt pocket,very suitable for business trips and outings!It can also be used for office or home

• Weight: 133g

• Cable Length: 3.3ft

• Size: 42mm x 22mm x 11mm

• Output interface polarity: positive inside and negative outside.

Before purchasing,check if your adapter supports the required voltage output to avoid wasting your time and money

Used together with PD/QC chargers

1. Most car chargers do not support 15V or 20V output;

2. Most old chargers do not support fast charging and can only output 5V;

3. Some chargers support 5V/9V/15V/20V, but do not support 12V;

4. Some chargers support 5V/9V/12V/20V, but do not support 15V;

5. Some chargers USB C support 5V/9V/12V/15V/20V, but the USB A interface supports 5V/9V/12V/20V,but does not have a 15V output.

Before purchasing,please check if your product interface matches the adapter interface to avoid wasting your time and money

• 10 connector tips: Micro-USB/Type-C/Mini USB/2.5*0.7mm/3.0*1.1mm/3.5*1.35mm/4.0*1.7mm/4.0*1.35mm/4.8*1.7mm/5.5*2.5mm;

• USB3.0 to type-c adapter: It can transfer data at a speed of up to 5Gbps between the type-c port and the USB-A port,such as copying mobile phone data to PC;

• 90°connector tips: convenient for use in narrow spaces,such as Charging laptops in narrow spaces.

Attention!!!

1.It must be used with a charger or power bank that supports one of the PD/QC/AFC protocols, Otherwise,only 5V can be output;

2. Before buying, check whether your charger or power bank supports the required load power supply gear to avoid wasting your time;

3. Short press the button only to turn on or off the display function,the output power supply is not turned off;

4. Long press to switch the voltage gear or short press to switch the display function,please disconnect the power supply to the device to avoid damage to your device by misoperation of the voltage switch;

5. To supply power to high-power equipment,check that the power of your charger or power bank is greater than the required power supply equipment;

6. When replacing different connector,please cut off the power.

Enjoy your happiness every day!