Cryorig H5 Universal CR-H5A Mid Tower CPU Heatsink with XT140 Fan for AMD/Intel

Proprietary Hive Fin System for airflow optimization, air turbulence reduction, added heat dissipation area, Jet Fin Acceleration System, and structural support. Heatpipe Displacement Optimization allows for better and more evenly spread heat conduction on the fins compared to traditional linear alignment. Jet Fin Acceleration System squeezes airflow and increases exhaust air speed. The increase of airflow speed in our Jet Fin Acceleration System allows heated air to leave the tower faster. Heatpipe Convex-Align System allows for more heatpipes in a given area, optimized heatpipe placement in the copper base, and improved alignment with your CPU. Includes one XT140 140mm PWM fan with our proprietary HPLN bearing for optimum airflow and noise ratio. The CRYORIG H5 Universal, features CRYORIG's H series moniker Hive Fin technology. The Hive Fin design allows for turbulence reduction of the airflow as well as Jet Fin Acceleration for faster hot air exhaust. CRYORIG's H series fits into the mainstream range within CRYORIG's lineup. With a total he ight of 160 mm, the H5 Universal will be able to fit into almost all mainstream PC chassis setups. The H5 Universal CPU and it's XL Surface Area, where the fin surface area is being extended to the back. In result, phenomenal cooling performance can be achieved compared to common Dual Tower coolers and heatsinks. H5 Universal is equipped with four pure copper heatpipes with 6 mm diameter. The nickel-plated base plate is made of pure solid copper and uses the Heatpipe Convex-Align technology, which allows the heatpipes to be concentrated directly above the center of the CPU. HEATSINK SPECIFICATION Dimension (with fan) L98 mm x W143 mm x H160 mm Weight (with fan) 853 g Weight (without fan) 764 g Heat pipes 6mm heatpipe x 4 units Fin T = 0.4 mm ; Gap = 2.8 mm Fin Pcs 38 pcs Copper Base C1100 Pure copper nickel plated RAM Height Limit Limitless TDP 160 W XT140 SPECIFICATION Dimension L140 mm x W140 mm x H13 mm Weight 89 g Rated Speed 700 ~ 1300 RPM ?10 % Noise Level 20 ~ 24 dBA Air Flow 65 CFM Air Pressure 1.49 mmH2O Ampere 0.27 AProprietary Hive Fin System for airflow optimization, air turbulence reduction, added heat dissipation area, Jet Fin Acceleration System, and structural support.Heatpipe Displacement Optimization allows for better and more evenly spread heat conduction on the fins compared to traditional linear alignment.Jet Fin Acceleration System squeezes airflow and increases exhaust air speed. The increase of airflow speed in our Jet Fin Acceleration System allows heated air to leave the tower faster.Heatpipe Convex-Align System allows for more heatpipes in a given area, optimized heatpipe placement in the copper