iEAGLE7 2.5 Mobile HDD SSD BOX USB3.0 Port Support TRIM NCQ ASM1153E Chip ALL Aluminium Fast SATA3 Speed ONLY 7mm Harddisk up to 5T

Model: iENGLE-7.
Dimensions: 117mm long*81mm wide * 10mm thick
Support: 7mm thick solid state hard disk / mechanical hard disk! advantage:
1. Slim, compact and stylish oval design;. 2. VL716 TYPE C USB 3.1 high-level master;
3. Support TRIM and UASP;
4. Intelligent sleep and automatically wake up;
5. With JEYI high-speed signal enhancement technology;
6. The intelligent two-color LED indicator recognizes the USB 3.0 / 3.1 connection status. Intelligent two-color LED indicator
Only red light: The current connection status is USB2.
O Red green light: The current connection status is USB 3.0 / 3.1 Only supports 2.5 -inch 7mm SATA interface HDD/SSD; IDE hard disk is not supported Not support 9.5 mm thick hard disk. Super
Speed
Plus USB (10Gb/s) and High-Speed USB(480Mb/s) - Compliant to Universal Serial Bus 3.1 Specification Revision 1.0 - Compliant to Universal Serial Bus Specification. Revision 2.0 - Mass Storage Class Bulk-Only Transport (BOT) USB Attached SCSI Protocol (UASP) for streaming - Integrated in-house Super
Speed
Plus PHY and USB2. O PHY. Serial ATA 6Gb/s, 3Gb/s and 1.5G b/s - Compliant to Serial ATA Specification Revision 3.1 - Intearated in-house SATA 6Gb/s PHY RBC command conversion for ATA device MMC-2 command pass-through to ATAPI - Supports 48-bit LBA - Supports multiple LUN. Fast 8051 Macro cell 80C32-Compatible Microcontroller - Standard 1T 8051 instruction set. USB Type-C connector support - CC1/CC2 cable orientation detection logic - Two sets of Super
Speed USB signal pins to enable plug flipping feature Note the main product (without affecting the normal use, the configuration has increased or decreased) Please allow 1-3cm error, due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.