Rockford Fosgate P1000X1BD Punch 1,000 Watt Mono Subwoofer Amplifier

The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers.

With its super efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.

1. 1 Year Warranty
2. Short circuit protection
3. Muted turn on
4. High level input capable with Auto Turn-On circuit
5. Features C.L.E.A.N. Set-up
6. Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
7. Stealth top mounted control panel
8. On-board Punch EQ with +18dB boost @ 45Hz
9. Over current protection
10. 12dB/octave Butterworth crossover
11. RCA pass-thru outputs
12. Infrasonic filter
13. Cast aluminum heatsink

Cta-2006 Compliant

Number of Channels

1

Total Power

(Sum of Rated Power)

1000 Watts

Rated Power

(RMS Continuous Power)

300 Watts x 1 @ 4-Ohm

500 Watts x 1 @ 2-Ohm

1000 Watts x 1 @ 1-Ohm

Dynamic Power

(PVC/PowerCube®)

491 Watts x 1 @ 4-Ohms

874 Watts x 1 @ 2-Ohms

1,430 Watts x 1 @ 1-Ohm

Bridgeable

No

Frequency Response

20Hz to 250Hz +/- 1.0dB

Input Sensitivity

150 mV - 12 V

Circuit Topology Class

Class BD

Efficiency (average)

86% @ 4-Ohm

Total Harmonic Distortion (THD+Noise)

4-Ohm: <1.0%

2-Ohm: <1.0%

1-Ohm: <1.0%

Signal Input

Hi/Low level: 1 RCA pair

Signal Output

Hi/Low level: 1 RCA pair

Tone Controls

Punch EQ2 Bass: 0dB to +18dB @ 45Hz

Crossover Controls

Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth

Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth

All-Pass: No

Remote Controls

Optional Punch Level Control (PLC2) Ready

Visual Indicators

Power/Protect/Thermal LED

Input Clip LED³

Output Clip LED^1,2,3

LED Color Legend:

¹BLUE: <0.5% THD

²VIOLET: 1% THD

³RED: 10%+ THD

Power Wire Gauge

4 AWG

Power Input Connector

Captive C-Clamp

Speaker Wire Gauge

8 AWG to 18 AWG

Speaker Output Connector

Captive C-Clamp

Cooling

Convection

Heatsink

Operating Voltage

9 - 16 VDC

Recommended Fuse

(not included)

140 A

Average Current Draw (13.8V Music)

65 A

Max. Current Draw (13.8V Sinewave)

130 A

Suggested Alternator

100 A

Included In The Box -

Dimensions (H x W x D)

2.38 x 7.76 x 13.28 (in)

6.05 x 19.71 x 33.73 (cm)

Shipping Weight

12.9 Lbs. (5.85 Kg.)