Ancel BA101 Automotive Battery Tester
Get a quick understanding of your vehicle battery health conditions. This tester is able to test a wide range of 12V batteries including Starting, Lighting, and Ignition (SLI), Deep Cycled and Marine (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell, and supports major battery standards including JIS, SAE, EN, DIN and IEC. It gives a quick and accurate result, which can be easily read on the large, backlit LCD display.
- Simple and easy to use
- Tests batteries on and off the vehicle
- Accurate results in milliseconds
- Battery life analysis
- Analysis results: Good or Replace
- Large easy–to–read LCD screen
- Test results based on JIS, EN, DIN, SAE and IEC Standards
- Quick test—inputs battery volume (AH), then shows battery status
- Vehicle cranking system test—cranking time, voltage and status
- Store the testing result and the print function
- Vehicle charging system test—load voltage, unloaded voltage, ripple status, and charging system status
- Test Results: Good or Replace
- Internal resistance value (m)
- Life in percentage (%)
- Cranking system
- Charging system
- System voltage: 12 Volts
- Input voltage range: 9V~15V
- Power requirements: No internal batteries required
- Capacity: Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating
Is the battery good or does it need to be replaced?
It tests the battery's CCA (or AH) value, charge (%), voltage (v), internal resistance (O), rated, battery health (%), etc. After a comprehensive analysis of the data, it provides an accurate assessment of whether a battery is good or needs to be replaced. The test result is shown directly by text prompt, giving an accurate display of the battery with percentage and numerical values.
Five Different Results of Battery Testing
- GOOD BATTERY: The battery is without any problem.
- GOOD, RECHARGE: Good battery but low current, and recharge before using.
- REPLACE: The battery is already at or near the end of its use life, and please replace the battery.
- BAD CELL, REPLACE: Battery interior damaged, bad cell or short circuit, and replace the battery.
- CHARGE-RETEST: Unstable battery shall be recharged and retested to avoid error.
Multiple Battery Standards Support
- It can test by AH and CCA values but also applies to other test standards such as BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.
- If your battery standard is AH standard, you can input the AH value to test in the "Quick Test" menu.
- If your battery is CCA or another standard, please input the CCA or other value to test in the "Battery in Vehicle" or "Battery out of vehicle" test menu.
Fast and Accurate Reading
- It adopts the world's most advanced conductance testing technology to date for accurate and authoritative test results.
- It quickly analyzes the data, usually taking 2-3 seconds to display the results.
- Easy to use, it can quickly and accurately identify battery problems.
Print Data Steps
- Before using the print data function, it is necessary to connect the tool to a computer via the USB cable. Once ready, please insert the CD to the computer.
- Install the USB driver first.
- Open the print software, and choose the COM Port NO.
- Then choose the function of print data to start printing.
Operating Specs:
- System voltage: 12 Volts
- Input voltage range: 9V~15V
- Power requirements: No internal batteries required. Power on when hooked up during testing.
- AH range: 30-220AH
Package List
- 1* Ancel BA101
- 1* User Manual
- 1* USB Cable