Monoprice Blackbird All to HDMI Converter with HDBaseT Extender, 100m

This video extender accepts inputs from a variety of standard and high definition video sources. Two HDMI inputs are designed for direct throughput to the outputs and support video resolutions up to 4K@30Hz, while the other six video inputs can be scaled up to 1920x1080p@60Hz. Each video input has a corresponding audio input for mixing an external audio signal with an audio-less video signal for normal output with audio. The selected video input is routed to both HDMI and HDBaseT outputs for local and remote viewing. The switch can be controlled using the front panel controls, the included IR remote control, an RS-232 connection to a PC, and a TCP/IP connection to an Ethernet network. The complete kit includes an HDBaseT receiver, two wideband IR receivers, and nine wideband IR transmitters.

• HDMI, HDCP, HDBaseT, and DVI standard compliant
• Four HDMI, one DVI, two VGA, and one Composite video inputs
• Two HDMI bypass inputs with support for resolutions up to 4K@30Hz
• Selectable scaling for the non-bypass inputs
• Supports HDBaseT extension to distances up to 100 meters using Cat5e, Cat6, or Cat7 network cable
• Supports Power over Ethernet (PoE) for the HDBaseT receiver
• Includes digital coaxial S/PDIF and analog stereo audio outputs
• Seven 3.81mm 3P captive screw connector analog audio inputs for mixing with the associated video signal
• Composite video input supports the PAL, NTSC 3.58, NTSC 4.43, SECAM, PAL/M, and PAL/N analog broadcast television standards
• Includes smart EDID management
• Supports computer control via RS-232 or TCP/IP interface
• Supports control of external devices via an RS-232 connection with the receiver
• Includes an IR remote control
• Supports wideband infrared extension and control
• Supports firmware updates via USB or RS-232 interface