Power Flashing white: bootup in progress White: not connected to UISP application Blue: connected to UISP application Flashing blue: locate in progress Blue/white: firmware upgrade in progress Ethernet Flashing blue: Ethernet traffic detected Links White: 5 GHz link Blue: 60 GHz link
Buttons
Factory reset
LAN Ports
(1) GbE RJ45 port
Power Supply
Max. power consumption 10W Power method Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8 -) Passive PoE 2-pairs (4, 5+; 7, 8 -), for 44–54V DC only Power supply 48V DC, 0.5A gigabit PoE adapter (Included) Can be powered by a UISP Router or UISP Switch Supported voltage range 44–54V DC 22–27V DC
Environmental
Temperature
-40 to 60° C (-40 to 140° F)
Humidity
5 to 95% noncondensing
Dimensions & Weight
Dimensions
Ø152.1 x 55.8 mm (Ø6 x 2.2")
Weight
Without mount: 347 g (12.2 oz) With mount: 409 g (14.4 oz)
Software Operating mode PtMP station, PtP Ubiquiti specific features Wave AI, discovery protocol Services UISP, ping watchdog, NTP client, SNMP Tools Antenna alignment, discovery utility, ping, trace route, speed test, cable test*, site survey* *FW version 3.3.0 and later. Network Bridge/Router* mode *Router is available in PtMP station mode only. Application requirements UISP web: Version 2.4.61 and later UISP mobile iOS™: Version 2.32.0 and later UISP mobile Android™: Version 2.31.9 and later
System Total throughput 2 Gbps (1 Gbps duplex) Max. range Up to 1.3 km (Wave AP) Up to 0.9 km (Wave AP Micro) Encryption WPA2-PSK (AES)
Additional Information
First Listed on Newegg
December 11, 2025
Customer Reviews of the Ubiquiti Networks Wave-Pico
There are no reviews yet.
Do you own this product?
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.